Membrane technology has been shown to be promising for the treatment of algae-laden water, but membrane fouling is still an obstacle influencing the purification efficiency and effluent quality. To mitigate ultrafiltration membrane fouling during Microcystis aeruginosa-laden water treatment, a strategy of sodium percarbonate pre-oxidation activated with ferrous ion (Fe/SPC) was put forward in this study. Due to the synergistic effect of Fe and SPC, this process was significantly more efficient with the terminal specific flux increased from 0.097 to 0.397, and the reversible fouling resistance reduced by approximately 80%. It was also found that subsequent sedimentation followed by Fe/SPC could further improve the fouling control efficiency. The model fitting results indicated that Fe/SPC pre-oxidation delayed the transition from standard blocking to cake filtration. Extracellular organic matter and algal cells were extracted from algal foulants to explore the contribution of each component, and the fouling control efficiencies were systematically studied. The characteristics of the algal foulants were determined with fluorescence excitation-emission matrix spectrum, and the results suggested that macromolecular proteinaceous substances were more efficiently removed by Fe/SPC, in comparison with humic-like matters. The alleviation of membrane fouling was also verified by the characterization methods of scanning electron microscopy and attenuated total reflection-Fourier infrared spectroscopy. Overall, the proposed strategy of Fe/SPC has an application prospect for membrane fouling control in algal-laden water treatment.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2020.140030DOI Listing

Publication Analysis

Top Keywords

membrane fouling
20
fouling control
16
sodium percarbonate
8
percarbonate pre-oxidation
8
fouling
8
algae-laden water
8
water membrane
8
water treatment
8
algal foulants
8
membrane
6

Similar Publications

This study focuses on the development of an efficient membrane-based clarification process to enhance the performance of subsequent ultrafiltration and produce high-quality sweet lime juice. A range of casting solutions were prepared using a blend of pore-forming polymers, including polyvinylpyrrolidone (PVP), polyvinylidene fluoride (PVDF), and cellulose acetate (CA), dissolved in dimethylformamide (DMF) solvent through the phase inversion technique. To further enhance the membrane's performance, four biopolymers poly (lactic acid) (PLA), xanthan gum, chitosan, and gelatin were incorporated, with and without clay, to refine its structure, porosity, and surface properties.

View Article and Find Full Text PDF

Conductive materials enhance anaerobic membrane bioreactor (AnMBR) treating waste leachate at high organic loading rates.

J Environ Manage

January 2025

College of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou, China; International Science and Technology Cooperation Platform for Low-Carbon Recycling of Waste and Green Development, Zhejiang Gongshang University, Hangzhou, China. Electronic address:

The treatment of landfill leachate using anaerobic membrane bioreactors (AnMBRs) often faces challenges such as poor removal efficiency, low methane yield and membrane fouling. This study applied AnMBRs with incrementally adding conductive materials to enhance the treatment of landfill leachate under high organic loading rates(35 kg COD/(m∙d)). With 50 g/L activated carbon, COD removal percentages and methane yield increased to 81.

View Article and Find Full Text PDF

Novel Ultrafiltration Polyethersulfone Membranes Blended with Carrageenan.

Polymers (Basel)

January 2025

Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Qatar Foundation, Doha P.O. Box 34110, Qatar.

The development of ultrafiltration (UF) polymeric membranes with high flux and enhanced antifouling properties bridges a critical gap in the polymeric membrane fabrication research field. In the present work, the preparation of novel PES membranes incorporated with carrageenan (CAR), which is a natural polymer derived from edible red seaweed, is reported for the first time. The PES/CAR membranes were prepared by using the nonsolvent-induced phase separation (NIPS) method at 0.

View Article and Find Full Text PDF

The rapid expansion of the cosmetics industry has significantly increased the adoption of alternative microplastics in response to increasingly stringent global environmental regulations. This study presents a comparative analysis of the treatment performance of silica powder and cornstarch-common alternatives for microplastics in cosmetics-using ceramic membrane filtration combined with flow imaging microscopy (FlowCam) to analyze particle behavior. Bench-scale crossflow filtration experiments were performed with commercially available alumina ceramic membranes.

View Article and Find Full Text PDF

Enhancing Virus Filter Performance Through Pretreatment by Membrane Adsorbers.

Membranes (Basel)

January 2025

Ralph E. Martin Department of Chemical Engineering, University of Arkansas, Fayetteville, AR 72701, USA.

Virus filtration is used to ensure the high level of virus clearance required in the manufacture of biopharmaceutical products such as monoclonal antibodies. Flux decline during virus filtration can occur due to the formation of reversible aggregates consisting of self-assembled monomeric monoclonal antibody molecules, particularly at high antibody concentrations. While size exclusion chromatography is generally unable to detect these reversible aggregates, dynamic light scattering may be used to determine their presence.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!