A high performance compact silicon photonics polarization splitter is proposed and demonstrated. The splitter is based on an asymmetric directional coupler. High extinction ratios at the through and drop ports of the polarization splitter are achieved by using an on-chip TE-pass polarizer and a TM-pass polarizer, respectively. The splitter, implemented on a silicon-on-insulator platform with a 220 nm-thick silicon device layer, has a measured insertion loss lower than 1 dB (for both TE and TM modes) and extinction ratio greater than 25 dB (for TM mode) and greater than 36 dB (for TE mode), in the wavelength range from 1.5 µm to 1.6 µm. The footprint of the device is 12 µm × 15 µm.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.396505DOI Listing

Publication Analysis

Top Keywords

polarization splitter
12
splitter based
8
based asymmetric
8
asymmetric directional
8
directional coupler
8
silicon photonics
8
splitter
5
high-extinction ratio
4
ratio polarization
4
coupler on-chip
4

Similar Publications

We propose a low-polarization-sensitive 1 × 2 carrier-injection-type silicon photonic switch consisting of a single Mach-Zehnder interferometer, an input-/output-side polarization splitter and rotators, bidirectional light injection, and an external optical circulator. A polarization-dependent loss (PDL) of 1.3 dB was achieved using the proposed structure, whereas a PDL exceeding 17 dB was observed without the structure.

View Article and Find Full Text PDF

This study proposes a spin-valley electron beam splitter based on the inner-edge states in a topological-insulator junction, which can allocate different ratios of spin-valley current outputs. Since the inner-edge states are associated with the "nearest path selection" mechanism, this device is referred to as the interface-modulating spin-valley electron beam splitter. Additionally, two perfect spin-valley filters in similar topological-insulator junctions are established in this study.

View Article and Find Full Text PDF

Ultra-compact and high-precision differential detection method based on liquid crystal polarization grating for miniature atomic magnetometer.

Nanophotonics

November 2024

Key Laboratory of Ultra-Weak Magnetic Field Measurement Technology, Ministry of Education, School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China.

Atomic magnetometers (AMs) that use alkali vapors, such as rubidium, are among the most sensitive sensors for magnetic field measurement. They commonly use polarization differential detection to mitigate common-mode noise. Nevertheless, traditional differential detection optics, including polarization beam splitters (PBS) and half-wave plates, are typically bulky and large, which restricts further reductions in sensor dimensions.

View Article and Find Full Text PDF

We propose a surface-normal dual-polarization in-phase and quadrature modulator (DP-IQM) that employs a thin dielectric metasurface (MS) layer inserted on a high-speed electro-absorptive modulator array. The metasurface provides the functionalities of all the passive components necessary for a DP-IQM, including a polarization beam splitter/combiner and an interferometric circuit, to a normal-incident beam. A dielectric metasurface composed of silicon nanoposts is designed and fabricated to experimentally demonstrate polarization and beam splitting functionalities with a phase error of less than 0.

View Article and Find Full Text PDF

Oblique angle of incidence two-way and three-way beam splitters were designed and fabricated. The devices feature two first-order diffraction gratings, arrayed crossed in alternating adjacent tiles, resulting in conical diffraction spot separation of two 1-orders in orthogonal planes while overlapping the 0-order. The two-way beam splitter was designed for 0-order suppression.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!