Emerging nanofluid-based technologies for cooling, transport, and storage applications have previously been enhanced through the use of graphene nanoflake (GNF) nanofluids. Many of the beneficial effects of GNFs have now been documented, though little work has yet been completed to characterize the morphological behaviour of GNF nanofluids both during and after the phase change process. In this study, the crystallization behaviour of sessile water droplets was evaluated for two plasma-functionalized, hydrophilic GNF concentrations (20 and 100 ppm) at three driving force temperatures (-5 °C, -10 °C, and -20 °C). At low driving forces, the GNFs were wholly expelled from the solid matrix due to low crystallization velocities. At high driving forces, more rapid crystallization rates resulted in the entrapment of GNFs within the air bubbles and inter-dendritic spaces of the solid droplet. However, individual particle dispersion was not achieved within the solid matrix at any driving force. Furthermore, for all experimental conditions, the functionalized GNF clusters which formed during freezing did not disperse spontaneously upon melting as drying-like effects may have altered the attraction properties of their surfaces and destabilized the suspension. Compared to previous studies using multi-walled carbon nanotubes, the GNFs were found to have higher liquid mobility at the solid front, provide less resistance to that front as it ascended, and be better dispersed after melting. These effects may have been geometrical; the square nanoflake geometry does not result in any physical particle entanglement.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1361-6528/abaae0DOI Listing

Publication Analysis

Top Keywords

graphene nanoflake
8
nanofluids phase
8
phase change
8
gnf nanofluids
8
driving force
8
driving forces
8
solid matrix
8
solid
5
behaviour plasma-functionalized
4
plasma-functionalized graphene
4

Similar Publications

High throughput intracellular delivery of biological macromolecules is crucial for cell engineering, gene expression, therapeutics, diagnostics, and clinical studies; however, most existing techniques are either contact-based or have throughput limitations. Herein, we report a light-activated, contactless, high throughput photoporation method for highly efficient and viable cell transfection of more than a million cells within a minute. We fabricated reduced graphene oxide (rGO) nanoflakes that was mixed with a polydimethylsiloxane (PDMS) nanocomposite thin sheet with an area of 3 cm and a thickness of ∼600 μm.

View Article and Find Full Text PDF

Two-dimensional (2D) materials are materials with a thickness of one or a few atoms with intriguing electrical, chemical, optical, electrochemical, and mechanical properties. Therefore, they are deemed candidates for ubiquitous engineering applications. Films and three-dimensional (3D) structures made from 2D materials introduce a distinct assembly structure that imparts the inherent properties of pristine 2D materials on a macroscopic scale.

View Article and Find Full Text PDF

Expanded Graphite as a Superior Anion Host Carrying High Output Voltage (4.62 V) and High Energy Density for Lithium Dual-Ion Batteries.

Micromachines (Basel)

October 2024

Department of Chemical, Biological, and Battery Engineering, Gachon University, Seongnam-si 13120, Gyeonggi-do, Republic of Korea.

The demand for safer, sustainable, and economical energy storage devices has motivated the development of lithium dual-ion batteries (Li_DIBs) for large-scale storage applications. For the Li_DIBs, expanded graphite (EG) cathodes are valuable as anion intercalation host frameworks to fabricate safer and more cost-effective devices. In this study, three different carbon cathode materials, including microwave-treated expanded graphite (MW-EG), ball-milled expanded graphite (BM-EG), and high-temperature-carbonized carbon nanoflakes (CNFs), were developed by different synthesis methods.

View Article and Find Full Text PDF

Portable unibody semi-flow injection voltammetric sensor for on-site screening of illegal additive sibutramine in food supplements.

Talanta

February 2025

Forensic Science Innovation and Service Center, Faculty of Science, Prince of Songkla University, Hat Yai, Songkhla, 90110, Thailand; Division of Health and Applied Sciences, Faculty of Science, Prince of Songkla University, Hat Yai, Songkhla, 90110, Thailand; Center of Excellence for Trace Analysis and Biosensor, Prince of Songkla University, Hat Yai, Songkhla, 90110, Thailand.

In this study, a simple, portable, unibody semi-flow injection system was coupled with a screen-printed electrode (SFI/SPE) for the on-site electrochemical screening of sibutramine (SBM) in food supplements. The SFI was fabricated by laser engraving acrylic plastic and was attached to a modified SPE with double-sided adhesive tape. The SPE was modified with a nanocomposite of nitrogen-doped graphene nanoflakes and carbon nanotubes synthesized using hydrothermal and ultrasonic methods.

View Article and Find Full Text PDF

In this work, we report a study of a zinc sulfide (ZnS) nanocrystal and reduced graphene oxide (RGO) nanocomposite-based non-enzymatic uric acid biosensor. ZnS nanocrystals with different morphologies were synthesized through a hydrothermal method, and both pure nanocrystals and related ZnS/RGO were characterized with SEM, XRD and an absorption spectrum and resistance test. It was found that compared to ZnS nanoparticles, the ZnS nanoflakes had stronger UV light absorption ability at the wavelength of 280 nm of UV light.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!