Copper carboxymethyl cellulose nanoparticles were prepared and characterized by FT-IR, XRD, SEM, TEM, and EDX techniques. Removal of tetracycline was obtained at 90% with optimized parameters of 500 μg/L concentration, 40 min contact time, 7.5 pH, 1.5 g/L dose, and 298 K temp. The adsorption followed Freundlich model very well in comparison to Langmuir. Tempkin model described good interactions between tetracycline and nanoparticles. Dubinin-Radushkevich isotherm confirmed the chemical nature of adsorption. The adsorption was pseudo-second order with a liquid film diffusion kinetics mechanism. The adsorption was endothermic and spontaneous as suggested by thermodynamics results. The supramolecular mechanism was developed for the process. Interestingly, the process was suitable at 7.5 pH with low contact time. These features of the adsorption made this process applicable at natural water conditions, making the process eco-friendly and feasible. Therefore, it may be an excellent method for the removal of tetracycline in any water system.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s11356-020-10189-1 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Efficient removal of tetracycline by VCo-layered double hydroxide encapsulated with chitosan: Optimization via Box-Behnken design, and thermodynamics.
Int J Biol Macromol
January 2025
Chemistry Department, Faculty of Science, Damietta University, Damietta 34517, Egypt. Electronic address:
The VCo-LDH/CS hydrogel beads were created by combining VCo-layered double hydroxide (VCo-LDH) and chitosan (CS) using a cross-linking process with epichlorohydrin. These beads were specifically designed to remove tetracycline (TTC). To characterize the VCo-LDH/CS hydrogel beads, several analytical techniques were used, with PXRD, XPS, FESEM, EDX, and FT-IR.
View Article and Find Full Text PDFMetagenomics unveils the role of hospitals and wastewater treatment plants on the environmental burden of antibiotic resistance genes and opportunistic pathogens.
Sci Total Environ
January 2025
School of Environmental and Natural Sciences, Bangor University, Bangor, Gwynedd Ll57 2UW, UK.
Antimicrobial resistance (AMR) is a global health challenge, with hospitals and wastewater treatment plants (WWTPs) serving as significant pathways for the dissemination of antibiotic resistance genes (ARGs). This study investigates the potential of wastewater-based epidemiology (WBE) as an early warning system for assessing the burden of AMR at the population level. In this comprehensive year-long study, effluent was collected weekly from three large hospitals, and treated and untreated wastewater were collected monthly from three associated community WWTPs.
View Article and Find Full Text PDFInterface dependent electron shunting in graphene-integrated intimately coupled photocatalytic biodegradation.
Water Res
December 2024
Department of Civil and Environmental Engineering, Institute of Science Tokyo, 2-12-1, Meguro- Ku, Tokyo, 152-8552, Japan. Electronic address:
Intimately coupled photocatalytic biodegradation (ICPB) has been recently developed as an efficient wastewater treatment technique, particularly for removing persistent organic pollutants. However, photocatalyst/biofilm interaction in terms of photoelectron transfer and its effect on the overall performance of ICPB has not been explored. To investigate these points, interface-engineered composites of bismuth vanadate and reduced graphene oxide with low degree (BiVO/rGO-LC) and high degree of their contact (BiVO/rGO-HC) were fabricated and applied for ICPB.
View Article and Find Full Text PDFBifunctional Hierarchical WO nanorods@Br-doped g-CN Z-scheme heterojunctions for efficient tetracycline photodegradation: optimization of key parameters, toxicological assessment, and electrocatalytic hydrogen evolution reaction.
Environ Res
January 2025
Department of Environmental Engineering, Kyungpook National University, 80 Daehak-ro, Buk-gu, Daegu 41566, Republic of Korea. Electronic address:
In this study, graphitic carbon nitride (CN) and tungsten trioxide (WO) were successfully incorporated into bromine (Br)-doped graphitic carbon nitride (BCN) using an in-situ hydrothermal method. The photocatalytic efficiency of the resulting WO/Br-doped CN (WBCN) composites for the removal of tetracycline (TC) antibiotics under sunlight irradiation was evaluated. The mass ratio of WO to Br-doped CN (BCN) significantly influenced TC adsorption and photocatalytic degradation, with an optimal ratio of 9:1.
View Article and Find Full Text PDFDual heteroatom-doped porous biochar from chitosan/lignosulfonate gels for enhanced removal of tetracycline by persulfate activation: Performance and mechanism.
Int J Biol Macromol
January 2025
School of Materials and Chemistry, Anhui Agricultural University, Hefei, Anhui 230036, China; Key Laboratory of Clean Dyeing and Finishing Technology of Zhejiang Province, Shaoxing, Zhejiang 312000, China. Electronic address:
Rational design of carbon material structures is essential for enhancing the performance of persulfate-based advanced oxidation processes (PS-AOPs) in water purification. In this study, a self-doping and self-templating strategy was devised to produce N, S co-doped biochar catalysts through pre-cryocrushing and carbonization procedures employing chitosan (N-source) and lignosulfonate (S-source) derived from biomass waste. The as-synthesized materials exhibited excellent performance in removing tetracycline (TC) through a synergistic process of adsorption and catalytic activation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!