The aim of this study was to compare the retention forces after artificial aging of telescopic crowns fabricated either by a conventional lost-wax technique or by computer-aided design/computer-aided manufacturing (CAD-CAM) technology. Two types of telescopic crowns (0°) were fabricated conventionally using high-noble (group A) and non-precious metal (group B). CAD-CAM fabricated telescopic crowns (0°) were made of non-precious metal (group C). Retention forces were assessed before and after artificial aging and after axial and non-axial loading. Initially [I.] and after artificial aging [IV.], specimens of group C (I. 16.2 N; IV. 13.6 N) exhibited the highest retention forces. The retention forces in groups B (I. 12.5 N; IV. 4.6 N) and A (I. 9.6 N; IV. 2.9 N) were found to be lower than those of group C. The retention force differences between the groups were statistically significant ( < 0.001) at all measurement times [I. vs. IV.]. Different fabricated telescopic crowns with approximately identical designs and materials exhibited different retention forces and different long-term retentive behavior. An optimized CAD-CAM process with individually defined design parameters ensured telescopic crowns with a better fit. These findings might influence prospective clinical decision-making.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7411578 | PMC |
| http://dx.doi.org/10.3390/ma13143228 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Purpose: Implant-supported overdentures have been an effective treatment method for edentulous mandibles. However, the loading time after implant placement is still controversial. The purpose of this study was to evaluate the outcome of implant-supported overdentures using telescopic crowns for the treatment of edentulous patients with immediate loading protocol.
View Article and Find Full Text PDFSurface topography changes and wear resistance of different non-metallic telescopic crown attachment materials in implant retained overdenture (prospective comparative in vitro study).
BMC Oral Health
September 2024
Prosthodontics Department, Faculty of Dentistry, Pharos University, Alexandria, Egypt.
Background: The purpose of this study was to evaluate the effect of using different types of metallic and non-metallic telescopic crown attachment materials on wear resistance and surface tomography changes in implant-retained mandibular overdentures.
Materials And Methods: Completely edentulous mandibular epoxy models were fabricated, in which two implants were placed in the canine region and retained to the implants with three different material combinations used for the construction of telescopic attachments. Thirty-three identical mandibular overdentures were fabricated using the conventional standardized technique.
Post and Core Treatment to Refit Telescopic Crown-Retained Dentures after Abutment Tooth Fracture: An Evaluation of Therapy by Retrospective Survival Analysis.
Dent J (Basel)
July 2024
Dental Clinic-Department of Prosthodontics, Justus Liebig University, Schlangenzahl 14, 35392 Giessen, Germany.
Article Synopsis
- Telescopic crown-retained dentures (TCDs) are widely used prosthetics for patients with missing teeth, but using a post and core (PC) treatment as an abutment often leads to failures, particularly due to fractures caused by extra axial forces.* -
- A study analyzed 246 patients and 399 PC treatments over up to 17.33 years, comparing two scenarios: PC treatment performed at the time of TCD fitting (PC1) versus after an abutment tooth fracture (PC2).* -
- Results indicated that PC2 had significantly lower survival rates than PC1, highlighting the importance of using PC1 when treating endodontically treated abutment teeth and the need for careful
Long-term assessment of the periodontal health of removable partial denture wearers: A systematic review and meta-analysis.
J Prosthet Dent
July 2024
Full Professor, Department of Dentistry, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil. Electronic address:
Statement Of Problem: The long-term effects of wearing removable partial dentures (RPDs) remain unclear.
Purpose: This systematic review addressed the question "Is the long-term use of RPDs deleterious to the remaining teeth?"
Material And Methods: This review was guided by the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist. Six databases and nonpeer-reviewed literature were searched in April 2024 without language or follow-up restrictions.
Clinical Longevity of Obturators in Patients with Jaw Defects: a Retrospective Cohort Study.
Clin Oral Investig
April 2024
Department of Prosthodontics, Dental Clinic, Justus-Liebig University, Schlangenzahl 14, 35392, Giessen, Germany.
Objectives: The primary objective of the present retrospective clinical study was to determine the survival time of obturators while analyzing possible influencing factors.
Materials And Methods: This retrospective clinical cohort study analyzed the influence of various clinical factors on the survival probability of obturators and their follow-up outcomes using Kaplan‒Meier analysis.
Results: A total of 76 patients with 115 obturators were included in the study (47 men and 29 women, mean age 58.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!