One type of clothing system used in the English Civil War, more common amongst cavalrymen than infantrymen, was the linen shirt, wool waistcoat and buff-coat. Ballistic testing was conducted to estimate the velocity at which 50% of 12-bore lead spherical projectiles (V) would be expected to perforate this clothing system when mounted on gelatine (a tissue simulant used in wound ballistic studies). An estimated six-shot V for the clothing system was calculated as 102 m/s. The distance at which the projectile would have decelerated from the muzzle of the weapon to this velocity in free flight was triple the recognised effective range of weapons of the era suggesting that the clothing system would provide limited protection for the wearer. The estimated V was also compared with recorded bounce-and-roll data; this suggested that the clothing system could provide some protection to the wearer from ricochets. Finally, potential wounding behind the clothing system was investigated; the results compared favourably with seventeenth century medical writings.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7417417 | PMC |
http://dx.doi.org/10.1007/s00414-020-02378-x | DOI Listing |
Langmuir
January 2025
School of Chemical Engineering, The University of Queensland, Brisbane, QLD 4072, Australia.
Ofloxacin, a commonly prescribed antibiotic, raises serious environmental concerns due to its persistence in aquatic systems. This study offers new insights into the environmental behavior of ofloxacin and its interactions with carbon-based adsorbents with the aim of enhancing our understanding of its removal mechanisms via adsorption processes. Using a comprehensive computational approach, we analyzed the speciation, pK values, and solubility of ofloxacin across various pH conditions, accounting for all four microspecies, including the often-overlooked neutral form.
View Article and Find Full Text PDFJ Occup Environ Hyg
January 2025
Suganthi Devadason Marine Research Institute, Tuticorin, Tamil Nadu, India.
Face masks are strongly believed to be the best precaution to reduce the transmission of the SARS-CoV-2 virus, which resulted in an unprecedented surge in the production and use of personal respiratory protective equipment. Unfortunately, this surge led to improper disposal of used masks. This study aimed to assess the occurrence of microplastics (MPs) in used and unused surgical and cloth masks and N95 respirators.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Laboratory of Adaptive Lighting Systems and Visual Processing, Technical University of Darmstadt, Hochschulstr. 4a, 64289 Darmstadt, Germany.
Thermopile sensor arrays provide a sufficient counterbalance between person detection and localization while preserving privacy through low resolution. The latter is especially important in the context of smart building automation applications. Current research has shown that there are two machine learning-based algorithms that are particularly prominent for general object detection: You Only Look Once (YOLOv5) and Detection Transformer (DETR).
View Article and Find Full Text PDFSensors (Basel)
January 2025
Centre for Microsystems Technology (CMST), IMEC and Ghent University, 9050 Zwijnaarde-Gent, Belgium.
The integration of electronics into textiles has gained considerable attention in recent years, due to the development and high demand of wearable and flexible electronics. One of the promising fields is healthcare, which often involves the utilization of textile-based electrodes. These electrodes often offer advantages such as conformability, breathability, and comfort.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Electronic and Telecommunications Systems, Rzeszów University of Technology, Wincentego Pola 2, 35-959 Rzeszow, Poland.
The production of consumer electronics using electrically conductive materials is a dynamically developing sector of the economy. E-textiles (electronic textiles) are also used in radio frequency identification technology, mainly in the production of tag antennas. For economic reasons, it is important that the finished product is universal, although frequencies in radio systems have different values in different regions of the world.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!