Metaldehyde removal was delivered to below the 0.1 μg L regulatory concentration in a laboratory scale continuous upflow fluidised sand bioreactor that had undergone acclimation through selective enrichment for metaldehyde degradation. This is the first reported case of successful continuous flow biological treatment of metaldehyde from real drinking water sources treating environmentally realistic metaldehyde concentrations. The impact of the acclimation process was impermanent, with the duration of effective treatment directly related to the elevated concentration of metaldehyde used during the enrichment process. The efficacy of the approach was demonstrated in continuous flow columns at both laboratory and pilot scale enabling degradation rates of between 0.1 and 0.2 mg L h. Future work needs to focus on optimisation of the sand bioreactor and the acclimation process to ensure viability and feasibility of the approach at full scale.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.watres.2020.116084 | DOI Listing |
Sci Rep
January 2025
Environmental Biotechnology, Institute of Microbiology, Department of Environment, Construction and Design, University of Applied Sciences and Arts of Southern Switzerland (SUPSI), 3 Medusoil SA, EPFL Innovation Park Building A, Manno, Switzerland.
Microbial-induced calcite precipitation (MICP), which leverages ureolytic microorganisms, has received significant attention during the past decade as a promising method for sustainable building and geoenvironmental applications. However, transitioning from lab-scale experimentation to volumes suitable for practical use poses challenges. This study addresses these obstacles by screening and analyzing over 50 strains sourced from (i) a natural environment in the canton of Ticino in Switzerland; (ii) microorganism banks; and (iii) an industry-scale bioreactor.
View Article and Find Full Text PDFJ Environ Health Sci Eng
December 2024
School of Engineering and Technology, Central Michigan University, Mt. Pleasant, MI 48859 USA.
Microplastic pollution has emerged as a global environmental concern, with pervasive contamination in terrestrial and aquatic ecosystems. This review paper delves into the intricate dynamics of microplastics within anaerobic digestion systems, addressing their occurrence, impact, and potential mitigation strategies. The occurrence of microplastics in anaerobic digesters is widespread, entering these systems through diverse inputs, such as sewage sludge, organic waste, and etc.
View Article and Find Full Text PDFJ Environ Manage
November 2024
School of Water Conservancy and Environment, University of Jinan, Jinan, 250022, China.
Chemosphere
June 2024
Department of Hydraulics and Sanitation, School of Engineering, University of São Paulo, Av. João Dagnone - 1100, 13563-120, São Carlos, São Paulo, Brazil. Electronic address:
The widely-used surfactant Nonylphenol Ethoxylate (NPEO) produces endocrine-disrupting compounds during biodegradation, with these byproducts being more harmful than untreated NPEO. This study investigates the effectiveness of a Fluidized Bed Reactor (FBR) in reducing the production of 4-Nonylphenol (4-NP) during the biodegradation of NPEO. Two identical FBR filled with sand were used to assess the NPEO degradation and to enhance the microbial consortia capable of breaking down the complex byproducts, ethanol and fumarate were introduced as co-substrates.
View Article and Find Full Text PDFSci Total Environ
May 2024
CSIRO Environment, 147 Underwood Avenue, Floreat, Western Australia (WA) 6014, Australia; School of Molecular and Life Sciences, Curtin University, Bentley, WA 5102, Australia.
This study proposed and examined a new process flowsheet for treating neutral mine drainage (NMD) from an open-pit gold mine. The process consisted of three sequential stages: (1) in situ hydrotalcite (HT) precipitation; (2) low-cost carbon substrate driven microbial sulfate reduction; and (3) ferrosol reactive barrier for removing biogenic dissolved hydrogen sulfide (HS). For concept validation, laboratory-scale columns were established and operated for a 140-days period with key process performance parameters regularly measured.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!