Surface nanobubbles at hydrophobic interfaces now attract much attention in various fields but their role in wetting-related phenomena is still unclear. Herein, we report the effect of a preliminary contact of "hot" solids with cold water previously proposed for generation of surface nanobubbles, on wettability of compact materials and flotation of particulate galena (PbS), sphalerite (ZnS), and Pb-Zn sulfide ore. Atomic force microscopy was applied to visualize the nanobubbles at galena crystals heated in air and contacted with cold water; X-ray photoelectron spectroscopy was used to characterize the surface composition of minerals. Contact angles measured with the sessile drop of cold water were found to increase when enhancing the support temperature from 0 to 80 °C for sphalerite and silica, and to pass a maximum at 40-60 °C for galena and pyrite (FeS) probably due to oxidation of sulfides. The temperature pretreatment depressed the recovery of sulfides in collectorless schemes and improved the potassium butyl xanthate-assisted flotation both for single minerals and Gorevskoye Pb-Zn ore. The results suggest that the surface nanobubbles prepared using the temperature difference promote flotation if minerals are rather hydrophobic and insignificantly oxidized, so the addition of collector and activator (for sphalerite) is necessary.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7408013PMC
http://dx.doi.org/10.3390/nano10071362DOI Listing

Publication Analysis

Top Keywords

surface nanobubbles
12
cold water
12
temperature difference
8
pb-zn ore
8
ore surface
8
surface
5
understanding role
4
role surface
4
surface gas
4
gas nanostructures
4

Similar Publications

Effect of Reaction Interface Structure on the Morphology and Performance of Thin-Film Composite Membrane.

Environ Sci Technol

January 2025

Jiangsu Key Laboratory of Anaerobic Biotechnology, School of Environment and Ecology, Jiangnan University, Wuxi 214122, PR China.

Thin-film composite (TFC) membrane has been extensively utilized and investigated for its excellent properties. Herein, we have constructed an active layer (AL) containing cave-like structures utilizing large meniscus interface. Furthermore, the impact of interface structure on the growth process, morphology, and effective surface area of AL has been fully explored with the assistance of sodium dodecyl benzenesulfonate (SDBS).

View Article and Find Full Text PDF

The efficient recovery of fine argentite from polymetallic lead-zinc (Pb-Zn) sulfide ore is challenging. This study investigated nanobubble (NB) adsorption on the argentite surface and its role in enhancing fine argentite flotation using various analytical techniques, including contact angle measurements, adsorption capacity analysis, infrared spectroscopy, zeta potential measurements, turbidity tests, microscopic imaging, scanning electron microscopy, and flotation experiments. Results indicated that the NBs exhibited long-term stability and were adsorbed onto the argentite surface, thereby enhancing surface hydrophobicity, reducing electrostatic repulsion between fine argentite particles, and promoting particle agglomeration.

View Article and Find Full Text PDF

Permanent Nanobubbles in Water: Liquefied Hollow Carbon Spheres Break the Limiting Diffusion Current of Oxygen Reduction Reaction.

J Am Chem Soc

January 2025

Department of Chemistry, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville, Tennessee 37996, United States.

Porous liquids have traditionally been designed with sterically hindered solvents. Alternatively, recent efforts rely on dispersing microporous frameworks in simpler solvents like water. Here we report a unique strategy to construct macroporous water by selectively incorporating hydrophilicity on the surfaces of hydrophobic hollow carbon spheres (HCS).

View Article and Find Full Text PDF

Impact of Water Purity and Oxygen Content in Gas Phase on Effectiveness of Surface Cleaning with Microbubbles.

Materials (Basel)

December 2024

Department of Biotechnology and Bioprocess Engineering, Faculty of Chemical and Process Engineering, Warsaw University of Technology, Waryńskiego 1, 00-645 Warsaw, Poland.

Cleaning of surfaces without complex cleaning agents is an important subject, especially in food, pharmaceutical, and biomedical applications. The subject of microbubble and nanobubble cleaning is considered one of the most promising ways to intensify this process. In this work, we check whether and how the purity of water used for microbubble generation, as well as the gas used, affects the effectiveness of cleaning stainless-steel surfaces.

View Article and Find Full Text PDF

Innovative CO-NBs-assisted ultrasonication for the phytochemical extraction of peanut (Arachis hypoga) shells: Synthesis and characterization of CO-nanobubbles.

Ultrason Sonochem

January 2025

College of Food Science and Technology/National R&D Branch Center for Conventional Freshwater Fish Processing (Wuhan), Huazhong Agricultural University, Wuhan 430070, PR. China. Electronic address:

This study was designed to obtain the maximum extraction yield of peanut shell (PS) polyphenols using a novel carbon dioxide nanobubbles (CO-NBs) assisted ultrasonic extraction method. CO-NBs were generated in distilled water with a self-developed high-pressure nano-jet homogenization method and characterized by size, zeta potential and transmission electron microscopy (TEM). The obtained nanobubble's mean size and zeta potential were 229.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!