Rationale: Gas chromatography/mass spectrometry (GC/MS) and high-performance liquid chromatography/time-of-flight mass spectrometry (HPLC/TOF-MS) were used to separate and reveal the molecular characteristics of organic matter in low-rank coals.

Methods: Six soluble portions (SPs) were obtained by sequential thermal dissolution (TD) of two low-rank coals in the order of cyclohexane, acetone and methanol solvents at 300°C. Organic matter with different molecular characteristics were enriched in eachTD extract, which was further separated and analyzed by GC/MS and HPLC/TOF-MS using an electrospray ionization source in positive mode to obtain a comprehensive understanding of the structural composition of coals.

Results: Low polarity compounds like alkanes and arenes have a better solubility in cyclohexane. Phorone has the highest relative abundance in the acetone SPs, and the main compounds detected in the methanol SPs are alcohols and phenols. According to the data from HPLC/TOF-MS, most of the oxygen atoms are in the form of carbonyl and alkoxy groups. The nitrogen-containing compounds in SPs are mainly saturated aliphatic amines and pyridines. The sulfur-containing compounds mainly exist in the form of thioalkanes and thiophenes.

Conclusions: Non-destructive methods were used to obtain soluble matter from coals, and different chromatographic and mass spectrometric techniques were used to separate and analyze the organic matter in coals. Detailed molecular structural information was obtained for the efficient and clean utilization of low-rank coals.

Download full-text PDF

Source
http://dx.doi.org/10.1002/rcm.8887DOI Listing

Publication Analysis

Top Keywords

low-rank coals
12
organic matter
12
sequential thermal
8
thermal dissolution
8
dissolution low-rank
8
high-performance liquid
8
liquid chromatography/time-of-flight
8
chromatography/time-of-flight mass
8
mass spectrometry
8
gas chromatography/mass
8

Similar Publications

This analysis revealed the alterations in the pore structure of large organic molecules in coal during the process of coal pyrolysis. Nine models of macromolecular structures in coals, representing distinct coal ranks, have been built. The research results show that along with the increasing coal rank, the average microporous volume of medium rank coal is 0.

View Article and Find Full Text PDF

Utilization of Low-Rank Coal and Zn-Bearing Dusts for Preparation of K, Na-Embedded Porous Carbon Material and Metallized Pellets by Synergistic Activation and Reduction Process.

Materials (Basel)

November 2024

State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures, MOE Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China.

A technology was developed for managing Zn-bearing dust, facilitating the recycling of hazardous solid waste and the production of porous carbon materials. In the one-step process, Zn-bearing dusts were employed not only as raw materials to prepare reduced Zn-bearing dust pellets but also as activators to prepare K, Na-embedded activated carbon. In the process, the Fe, C, Zn, K, and Na in the dusts were rationally utilized.

View Article and Find Full Text PDF

Aligned Hollow Silicon Nanorods Containing Ionic Liquid Enhanced Solid Polymer Electrolytes with Superior Cycling and Rate Performance.

Adv Sci (Weinh)

November 2024

Xinjiang Key Laboratory of High Value Green Utilization of Low-Rank Coal, School of Physics and Materials Science, Changji University, Changji, Xinjiang, 831100, China.

The low lithium-ion conductivity of polyethylene oxide (PEO)-based polymer electrolytes limits their application in solid-state lithium batteries and related fields. Here, ionic liquids (ILs) are injected into hollow silicon nanorods (HSNRs) to prepare a composite solid polymer electrolyte (CSPE) with aligned HSNRs containing ILs (F-ILs@HSNRs). Applying a magnetic field promoted uniform dispersion and orientation of F-ILs@HSNRs in CSPE.

View Article and Find Full Text PDF

CO injection into coal seams not only enhances coalbed methane (CBM) extraction but also allows for CO sequestration. Microwave irradiation is considered to be an effective technology to enhance CBM extraction. In this paper, the effects of microwave irradiation and supercritical CO immersion on the pore structure of low-rank coals were investigated by scanning electron microscopy (SEM), mercury-in-pressure (MIP), low-temperature nitrogen adsorption (LTNGA), and carbon dioxide isothermal adsorption/desorption (COIA/D) of coal samples.

View Article and Find Full Text PDF

Research on Activation Mechanisms In Situ during Rapid Desorption of Mercury-Absorbing Activated Coke by the Heating Method.

ACS Omega

November 2024

National Engineering Laboratory for Coal-fired Pollutants Emission Reduction, Shandong University, Jinan, Shandong 250061, China.

The adsorption of active coke is a good method to control mercury in coal-fired power plants, but spent powdered activated coke (SPAC) will cause secondary pollution and waste of resources if it is not properly treated. The purpose of this study was to explore the desorption performance of SPAC when heated in a drop-tube reactor under different atmospheres. The carbon consumption was 0.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!