Metal electrodes are playing an increasingly important role in controlling photon absorption and in promoting optimal light management in thin-film semiconductor devices. For organic optoelectronic devices, the conventional fabrication approach is to build the device on top of a transparent electrode, with metal electrode deposition as the last step. This makes it challenging to control the surface of the metal electrode to promote good light management properties. An inverted fabrication approach that builds the device on top of a metal electrode makes it possible to control the morphology of the metal surface independently of the organic semiconductor active layer to achieve a variety of photonic and plasmonic behaviors useful for devices. However, there are few reports of inverted fabrication of organic optoelectronic devices and its impacts on device properties. Silver (Ag) is the most suitable metal for fabrication of nanostructured electrodes with plasmonic behavior (i.e., plasmonic electrodes) because of its low parasitic absorption loss and high reflectivity. In this project, we describe the facile fabrication of silver nanoparticle (AgNP) aperiodic plasmonic metasurfaces and study their physical and optical characteristics. Then, we investigate the photonic and electrical behaviors of the aperiodic plasmonic metasurfaces when interfaced with poly(9,9-dioctylfluorene--benzothiadiazole) (F8BT) organic semiconducting polymer thin films. The luminescence quantum yield of F8BT thin films increases from 29% on planar Ag up to 66% on AgNP metasurfaces due to the Purcell effect and the improved extraction of emission coupled to surface plasmon polariton modes. In particular, we show that plasmonic enhancement can overcome ohmic losses associated with metals and metal-induced exciton quenching. According to the current-voltage characteristics of hole-only devices with and without aperiodic plasmonic metasurfaces, we conclude that AgNP aperiodic plasmonic metasurfaces have comparable electrical behavior to planar metal electrodes while having superior light management capability.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.0c07099 | DOI Listing |
Controlling the bandwidth and directionality of thermal emission is important for a broad range of applications, from imaging and sensing to energy harvesting. Here, we propose a new, to the best of our knowledge, type of long-wavelength infrared narrowband thermal emitter that is basically composed of aperiodic Tamm plasmon polariton structures. Compared to the thermal emitter based on periodic structures, more parameters need to be considered.
View Article and Find Full Text PDFA new plasmonic nanofocusing metalens based on aperiodic silica grating arrays was designed and investigated. Assisted by the graphene surface plasmon, the infrared polarized light can be focused in a nanospot with a dynamically controlled focal length by varying the dielectric strip width or the graphene Fermi level E. For instance, with λ = 8 µm and E at 0.
View Article and Find Full Text PDFNat Mater
December 2021
Department of Mechanical Engineering, Vanderbilt University, Nashville, TN, USA.
Wavelength-selective thermal emitters (WS-EMs) are of interest due to the lack of cost-effective, narrow-band sources in the mid- to long-wave infrared. WS-EMs can be realized via Tamm plasmon polaritons (TPPs) supported by distributed Bragg reflectors on metals. However, the design of multiple resonances is challenging as numerous structural parameters must be optimized simultaneously.
View Article and Find Full Text PDFNanotechnology
May 2021
Centre for Nano Science and Engineering, Indian Institute of Science, Bangalore, India.
We report a large chiro-optical response from a nanostructured film of aperiodic dielectric helices decorated with ellipsoidal metal nanoparticles. The influence of the inherent fabrication variation on the chiro-optical response of the wafer-scalable nanostructured film is investigated using a computational model which closely mimics the material system. From the computational approach, we found that the chiro-optical signal is strongly dependent on the ellipticities of the metal nanoparticles and the developed computational model can account for all the variations caused by the fabrication process.
View Article and Find Full Text PDFThe coordinate transformation method (C method) is a powerful tool for modeling photonic structures with curved boundaries of discontinuities. As a modal method upon the Fourier basis, the C method has superior computational efficiency and rich physical intuitiveness compared to other full-wave numerical methods. But presently the C method is limited to two-dimensional (2D) structures if the boundaries between adjacent z-invariant layers are of generally different profiles [with (x,y,z) being the Cartesian coordinate].
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!