Studies on the Performance of Molar Porous Root-Analogue Implant by Finite Element Model Simulation and Verification of a Case Report.

Purpose: The aim of this study was to evaluate the effect of porous layer thickness in a 3-dimensionally printed 1-piece molar porous root-analogue implant (RAI) on the biomechanical properties of the peri-implant bone and the clinical efficacy of one such implant in a patient.

Materials And Methods: Three RAIs with different superficial porous layer thicknesses (0.5 mm, 1 mm, and fully porous) were designed and assembled using a mandible model and then solidified to obtain 3 finite elements models, denoted A, B, and C. Finite element analysis was performed to analyze the stress on the solid and porous structures of the RAIs and the stress and strain experienced by the bone surrounding the implant. RAIs were fabricated by selective laser melting. An unrepairable molar in a single patient was selected for replacement. An RAI was designed and prepared and then implanted into the alveolar bone immediately after minimally invasive extraction of the damaged tooth. Definitive restorations were placed after a 3-month period of uninterrupted healing.

Results: The stress concentration observed in the 3 types of RAI was principally between the solid and porous interface contact points, with maximum stress on the solid and porous structures smaller than that of the respective yield strength. The introduction of a porous structure on the surface of the RAIs increased peri-implant bone stress, which increased with thickness of the porous layer. The 3-dimensionally printed porous RAI exhibited excellent initial stability immediately after implantation. After continual observation for 6 months, it was found that bone surrounding the root had infiltrated into the RAI, achieving good osseointegration.

Conclusions: Stress shielding can be reduced by decreasing the elastic modulus of the implant, with the interface between implant and bone allowing more appropriate stress conduction. A 1-piece porous RAI fabricated using 3-dimensional printing establishes a new indication for immediate implantation after extraction.