AI Article Synopsis
Article Abstract
Sulfur cathodes have been under intensive study in various systems, such as Li/S, Na/S, Mg/S, and Al/S batteries. However, to date, Zn/S chemistry has never been reported. The first reliable aqueous Zn/polysulfide system activated by a "liquid film" comprising 4-(3-butyl-1-imidazolio)-1-butanesulfoni ionic liquid (IL) encapsulated within PEDOT:PSS. CF SO anions in the IL operating as Zn -transfer channels is reported. Moreover, the PEDOT:PSS network retains the IL, which renders Zn -transfer channels and a polysulfide cathode with enhanced structural stability. The Zn/polysulfide system delivers extraordinary capacity of 1148 mAh g and overwhelming energy density of 724.7 Wh kg at 0.3 Ag . During the discharging phase, S is dominantly reduced by Zn to S (S → S ). During the charging phase, these short chains are oxidized to form long-chain Zn Li S . A further optimized high-concentrated salt electrolyte is used to improve the reversibility of the battery, demonstrating an extended lifetime over 1600 cycles at 1 Ag with a capacity retention of 204 mAh g . This facile approach and the superior performance of the developed aqueous Zn/S chemistry provide a new platform for sulfur-based battery and potentially solve the problems of other metal/sulfur batteries.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.202003070 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Defective boron nitride aerogels by salt template synthesis: A green adsorbent for tetracycline removal.
Environ Res
January 2025
Department of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, PR China; Shaanxi Province Key Laboratory of Corrosion and Protection, Xi'an University of Technology, Xi'an 710048, PR China. Electronic address:
Hexagonal boron nitride (h-BN) exhibits unique application potential in water purification due to its large specific surface area, high porosity, and chemical inertness. Designing adsorbents with highly active adsorption sites is one effective method to improve their adsorption capacities. In this study, porous h-BN aerogels containing multiple defect types (DP-BN) were synthesized by using salt templates.
View Article and Find Full Text PDFPFAS Destruction and Near-Complete Defluorination of Undiluted Aqueous Film-Forming Foams at Ambient Conditions by Piezoelectric Ball Milling.
Environ Sci Technol
January 2025
Department of Civil and Environmental Engineering, Clarkson University, Potsdam, New York 13699, United States.
The nonthermal destruction of aqueous film-forming foam (AFFF) stockpiles, one of the major culprits responsible for water and soil contamination by per- and polyfluoroalkyl substances (PFAS), is extremely challenging because of the coexistence of mixed recalcitrant PFAS and complicated organic matrices at extremely high concentrations. To date, the complete defluorination of undiluted AFFF at ambient conditions has not been demonstrated. This study reports a novel piezoelectric ball milling approach for treating AFFF with a total organic fluorine concentration of 9080 mg/L and total organic carbon of 234 g/L.
View Article and Find Full Text PDFA Wenzel Interfaces Design for Homogeneous Solute Distribution Obtains Efficient and Stable Perovskite Solar Cells.
Adv Mater
January 2025
College of Chemistry and Chemical Engineering/Film Energy Chemistry for Jiangxi Provincial Key Laboratory (FEC), Nanchang University, 999 Xuefu Avenue, Nanchang, 330031, China.
The coffee-ring effect, caused by uneven deposition of colloidal particles in perovskite precursor solutions, leads to poor uniformity in perovskite films prepared through large-area printing. In this work, the surface of SnO is roughened to construct a Wenzel model, successfully achieving a super-hydrophilic interface. This modification significantly accelerates the spreading of the perovskite precursor solution, reducing the response delay time of perovskite colloidal particles during the printing process.
View Article and Find Full Text PDFPhysico-Chemical Properties of Granular Sorbents Based on Natural Bentonite Modified by Polyhydroxocations of Aluminum and Iron (III) by Co-Precipitation.
Molecules
January 2025
Department of General and Biological Chemistry, Astana Medical University, 010000 Astana, Kazakhstan.
The physicochemical and adsorption properties of granular sorbents based on natural bentonite and modified sorbents based on it have been studied. It was found that modification of natural bentonite with iron (III) polyhydroxocations (mod. 1_Fe_5 GA) and aluminum (III) (mod.
View Article and Find Full Text PDFSynergistic oxidative modification and covalent cross-linking for the construction of sesbania gum-based high efficiency dust suppression foam sols.
Int J Biol Macromol
January 2025
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China; State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China.
To effectively utilize sesbania gum in coal dust control and address the limitations of excessive viscosity and mediocre strength, oxidation treatment was used to improve its fluidity. Polyvinyl alcohol (PVA) and sodium trimetaphosphite (STMP) were used to enhance oxidized sesbania gum OSG, and crosslinking technology was used to improve its mechanical stability. This study developed a novel foam dust suppressant OSG-PVA/SDBS by response surface design, and the optimized dust suppressant material exhibited excellent adhesion and curing properties.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!