Soft robotics is an emerging field enabled by advances in the development of soft materials with properties commensurate to their biological counterparts, for the purpose of reproducing locomotion and other distinctive capabilities of active biological organisms. The development of soft actuators is fundamental to the advancement of soft robots and bio-inspired machines. Among the different material systems incorporated in the fabrication of soft devices, ionic hydrogel-elastomer hybrids have recently attracted vast attention due to their favorable characteristics, including their analogy with human skin. Here, we demonstrate that this hybrid material system can be 3D printed as a soft dielectric elastomer actuator (DEA) with a unimorph configuration that is capable of generating high bending motion in response to an applied electrical stimulus. We characterized the device actuation performance via applied (i) ramp-up electrical input, (ii) cyclic electrical loading, and (iii) payload masses. A maximum vertical tip displacement of 9.78 ± 2.52 mm at 5.44 kV was achieved from the tested 3D printed DEAs. Furthermore, the nonlinear actuation behavior of the unimorph DEA was successfully modeled using analytical energetic formulation and a finite element method (FEM).
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7319180 | PMC |
| http://dx.doi.org/10.1016/j.eml.2018.02.002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Sunlight-Drivable Composite Film Using Carbon Nanopowder-doped PVDF and Liquid Crystal Polymer Network.
ACS Appl Mater Interfaces
December 2024
Department of Applied Physics, Hebei University of Technology, Tianjin 300401, PR China.
Actuators based on liquid crystals have garnered significant attention due to their potential applications in wearable technology and bionic soft robots. Composite films composed of liquid crystal polymer networks (LCNs) and other stimulus-responsive materials exhibit the capability to convert external stimuli into mechanical deformation. However, the development of sunlight-driven actuators presents significant challenges, primarily due to the relatively low intensity of sunlight and the limited conversion efficiency of photothermal materials.
View Article and Find Full Text PDFA Novel Pneudraulic Actuation Method to Enhance Soft Robot Control.
Soft Robot
December 2024
Department of Surgical & Interventional Engineering, School of Biomedical Engineering & Imaging Sciences, King's College London (KCL), London, UK.
Modern industrial and medical applications require soft actuators with practical actuation methods, capable of precision control and high-speed performance. Within the realm of medical robotics, precision and speed imply less complications and reduced operational times. Soft fluidic actuators (SFAs) are promising candidates to replace the current rigid endoscopes due to their mechanical compliance, which offers safer human-robot interaction.
View Article and Find Full Text PDFProgrammable Wrinkled MXene-Based Soft Actuators with Moisture- and Light-Responsive Deformation and Water-Surface Locomotion Capabilities.
ACS Appl Mater Interfaces
December 2024
School of Material Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, P.R. China.
Soft actuators are limited by single-mode driving technology, which poses challenges in dealing with complex and multidimensional movements. In this study, a multiresponsive soft actuator was fabricated by integrating a microwrinkling structure into an MXene-based film, enabling programmable motions. To achieve this, we introduced -hexane into the film preparation process and utilized its rapid volatilization to accelerate the shrinkage difference between the film and the substrate.
View Article and Find Full Text PDFCephalopod-Inspired MXene-Integrated Mechanochromic Cholesteric Liquid Crystal Elastomers for Visible-Infrared-Radar Multispectral Camouflage.
Angew Chem Int Ed Engl
December 2024
Tianjin University, Materials Science and Engineering, CHINA.
Multispectral camouflage materials play a vital role in sophisticated multi-band electromagnetic (EM) applications. However, conventional single-band stealth is difficult to align with the growing demand for multi-band compatibility and intelligent adaptation. Herein, we report the design and synthesis of cephalopod-inspired MXene-integrated cholesteric liquid crystal elastomers (MXene-CLCEs) with multispectral camouflage capability, which was fabricated through in situ thiol-acrylate Michael addition and free-radical photopolymerization of CLCE precursor and isocyanate-mediated robust covalent chemical bonding of MXene nanocoating at the interface.
View Article and Find Full Text PDFPEDOTs-Based Conductive Hydrogels: Design, Fabrications, and Applications.
Adv Mater
December 2024
Jiangxi Provincial Key Laboratory of Flexible Electronics, Jiangxi Science & Technology Normal University, Nanchang, Jiangxi, 330013, P. R. China.
Conductive hydrogels combine the benefits of soft hydrogels with electrical conductivity and have gained significant attention over the past decade. These innovative materials, including poly(3,4-ethylenedioxythiophene) (PEDOTs)-based conductive hydrogels (P-CHs), are promising for flexible electronics and biological applications due to their tunable flexibility, biocompatibility, and hydrophilicity. Despite the recent advances, the intrinsic correlation between the design, fabrications, and applications of P-CHs has been mostly based on trial-and-error-based Edisonian approaches, significantly limiting their further development.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!