Purpose: To develop a reliable, consistent, and reproducible reference phantom for error quantification of phase-contrast MRI so it can be used for validation and quality control.
Methods: An air-driven rotation phantom consisting of a steadily rotating cylinder surrounded by a static ring both filled with agarose gel was developed. Rotational speed was measured and controlled in real time using an optical counter and a closed-loop controller. Consistency of the phantom was assessed by recording variations in rotational speed. The phantom was imaged with 2D phase-contrast MRI, and the velocity at each point was compared with analytically predicted velocity. Additionally, to examine reproducibility, the phantom was run with the same rotational speed on 2 different days and imaged using the same phase-contrast MRI protocol.
Results: The rotation phantom provided consistent rotational speed with 2 revolutions per minute SD from the set value for 20 min. Comparison between predicted and measured velocities demonstrated excellent agreement (intraclass correlation coefficient of 0.99). The RMS error in velocity components were less than 1% of maximum value. The scan-rescan experiment showed that the phantom can reproduce the same velocity distributions (intraclass correlation coefficient of 0.99) using the same rotational speed and MRI settings.
Conclusion: The developed rotation phantom provided well-defined and reproducible linear velocity distributions, which can be used for systematic and quantitative error analysis of phase-contrast MRI for a range of known velocities.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/mrm.28343 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Impact of High-Speed Crushing Process of Fibrous Polytetrafluoroethylene on Pyrolyzed Carbon Black/Natural Rubber Composites.
Polymers (Basel)
January 2025
School of Mechatronics Engineering, Qingdao University of Science and Technology, Qingdao 266061, China.
This study employed a high-speed rotating crushing process to modify pyrolyzed carbon black (CBp) using self-lubricating and low-friction polytetrafluoroethylene (PTFE). The effects of PTFE content on the dispersion, mechanical properties, wear resistance, and thermal stability of modified PTFE-CBp/natural rubber (NR) composites were investigated. The rotating crushing process from the high-speed grinder altered the physical structure of PTFE, forming tiny fibrous structures that interspersed among the CBp particles.
View Article and Find Full Text PDFDesign, Modeling, and Validation of a Compact, Energy-Efficient Mixing Screw for Sustainable Polymer Processing.
Polymers (Basel)
January 2025
Department of Mechanical Engineering, University of Massachusetts Lowell, Lowell, MA 01854, USA.
This study presents the design, modeling, and validation of a mixing screw for energy-efficient single-screw extrusion. The screw features a short length-to-diameter (L/D) ratio of 8:1 and incorporates double flights with variable pitch and counter-rotating mixing slots. These features promote enhanced plastication by breaking up the solid bed and improving thermal homogeneity through backflow mechanisms relieving a 3.
View Article and Find Full Text PDFIntegrating Machine Learning for Predictive Maintenance on Resource-Constrained PLCs: A Feasibility Study.
Sensors (Basel)
January 2025
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy.
This study investigates the potential of deploying a neural network model on an advanced programmable logic controller (PLC), specifically the Finder Opta™, for real-time inference within the predictive maintenance framework. In the context of Industry 4.0, edge computing aims to process data directly on local devices rather than relying on a cloud infrastructure.
View Article and Find Full Text PDFThe Design and Validation of an Open-Palm Data Glove for Precision Finger and Wrist Tracking.
Sensors (Basel)
January 2025
Division of Robotics, Swinburne University of Technology, Hawthorn, VIC 3122, Australia.
Wearable motion capture gloves enable the precise analysis of hand and finger movements for a variety of uses, including robotic surgery, rehabilitation, and most commonly, virtual augmentation. However, many motion capture gloves restrict natural hand movement with a closed-palm design, including fabric over the palm and fingers. In order to alleviate slippage, improve comfort, reduce sizing issues, and eliminate movement restrictions, this paper presents a new low-cost data glove with an innovative open-palm and finger-free design.
View Article and Find Full Text PDFTribo-Electrochemical Mechanism of Material Removal Examined for Chemical Mechanical Planarization of Stainless-Steel Using Citrate Buffer as a Complexing Agent.
Materials (Basel)
January 2025
Department of Physics, Clarkson University, Potsdam, NY 13699-5820, USA.
Chemical mechanical planarization (CMP) is a technique used to efficiently prepare defect-free, flat surfaces of stainless steel (SS) foils and sheets that are implemented in various modern devices. CMP uses (electro)chemical reactions to structurally weaken the surface layers of a workpiece for easy removal by low-pressure mechanical abrasion. Using a model CMP system of 316/316L stainless steel (SS) in an acidic (pH = 3.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!