Arsenic in groundwater for human consumption has negative effects on human's health worldwide. Due to the above, it is essential to invest in the development of new materials and more efficient technology for the elimination of such priority contaminants as arsenic. Therefore, in the present work, it was synthesized an amorphous hybrid material ZrOx-FeOx with a high density of OH groups, to improve the arsenic adsorption capacity of iron (FeOx) and zirconium (ZrOx) that makes up the bimetallic oxyhydroxide. The spectra of FT-IR and pK's distribution suggest that in the synthesized binary oxides, a new union between the two metallic elements is formed by means of an oxygen (metal-O-metal). In addition, TEM profiles suggest that there are chemical interactions between both metals since no individual particles of iron oxide and zirconium oxide were found. According to the results, the adsorption capacity of the ZrOx-FeOx material increases 4.5 and 1.4 times with respect to FeOx and ZrOx, respectively. At pH 6, the maximum adsorption capacity was 27 mg g, but at pH greater than 7, the arsenic adsorption capacity onto ZrOx-FeOx decreased 66%. Graphical Abstract.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s11356-020-09492-8 | DOI Listing |
Adv Mater
January 2025
Max Planck Institute for Solid State Research, Heisenbergstr. 1, 70569, Stuttgart, Germany.
The rapid advancement of covalent organic frameworks (COFs) in recent years has firmly established them as a new class of molecularly precise and highly tuneable porous materials. However, compared to other porous materials, such as zeolites and metal-organic frameworks, the successful integration of hierarchical porosity into COFs remains largely unexplored. The challenge lies in identifying appropriate synthetic methods to introduce secondary pores without compromising the intrinsic structural porosity of COFs.
View Article and Find Full Text PDFEnviron Res
January 2025
Faculty of Exact Sciences and Technology, Federal University of Grande Dourados, Dourados, MS, 79804-970, Brazil. Electronic address:
Transforming lignocellulosic biomass waste into value-added materials like porous carbons offers a sustainable and increasingly important solution for its efficient management within a circular economy framework. Although the heteroatom-doping process enhances oxygen- or nitrogen-containing functionalities on porous carbons, it often leads to losses in structural integrity and other key functionalities. This study presents a novel protocol to produce N-doped porous carbons that efficiently introduces nitrogen groups while improving surface area, microporosity definition and the concentration of oxygen-containing functionalities.
View Article and Find Full Text PDFJ Chromatogr A
January 2025
Key Laboratory of Protection, Development and Utilization of Medicinal Resources in Liupanshan Area, Ministry of Education, College of Pharmacy, Ningxia Medical University, Yinchuan 750004, China; Key Laboratory of Ningxia Minority Medicine Modernization, Ministry of Education, Ningxia Medical University, Yinchuan 750004, China. Electronic address:
Molecularly imprinted polymers (MIPs) are typically synthesized in organic solvents, leading to poor compatibility with water, weak affinity and selectivity for target molecules in aqueous media. To address these challenges, a green and sustainable synthesis of sandwich bread-like ATP@MIP was conducted using polyethylenimide (PEI) and deep eutectic solvent (DES) as hydrophilic bi-functional monomers via layer-by-layer self-assembly on the attapulgite (ATP) carrier. The new ATP@MIP can provide a higher density of imprinting sites with more orderly and uniform distribution due to inhibiting the competitive polymerization between PEI and DES, thereby significantly enhancing recognition ability.
View Article and Find Full Text PDFJ Environ Manage
January 2025
Department of Chemical Engineering, Cyprus University of Technology, 30 Archbishop Kyprianou Str., 3036, Limassol, Cyprus. Electronic address:
Herein, a citrus processing wastewater-based biorefinery has been developed manufacturing essential oils, polyphenols and bacterial cellulose. Liquid-liquid extraction was evaluated for isolation of essential oils assessing different organic solvents, recovering 0.45 kg of essential oils per m of wastewater using n-heptane.
View Article and Find Full Text PDFSci Total Environ
January 2025
Environmental Nanoscience Laboratory, Department of Earth Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal 741246, India; Centre for Climate and Environmental Studies, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal 741246, India. Electronic address:
Over the last decades, the release and occurrence of organic pollutants in aquatic systems have become a major global concern due to their bioaccumulation, toxicity, and adverse effects on the ecosystem. Tetracycline (TC), a widely used antibiotic, is often found at high concentrations in the aqueous environment and tends to bind with the natural colloids. Post-COVID-19 pandemic, the release of surfactants in the environment has increased due to the excessive use of washing and cleaning products.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!