This study aimed to produce cellulose-based conductive fabrics with electrical conductivity and flexibility. Bacterial cellulose (BC) and three chemical cellulose (CC), namely methyl cellulose (MC), hydroxypropyl cellulose (HPMC) and carboxymethyl cellulose (CMC) were in situ polymerized with aniline and the four conductive cellulose fabrics were compared and evaluated. Matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy analysis confirmed that three CC-PANI composites displayed longer and more stable polymerization pattern than BC-PANI because of the different polymerization method: bulk polymerization for BC-PANI and emulsion polymerization for CC-PANI, respectively. The electrical conductivity of BC-PANI and CC-PANI were ranging from 0.962 × 10-2 S/cm to 2.840 × 10-2 S/cm. MC-PANI showed the highest electrical conductivity among the four conductive cellulose fabrics. The flexibility and crease recovery results showed that MC-PANI had the highest flexibility compared to BC-PANI, HPMC-PANI, and CMC-PANI. These results have confirmed that the electrical conductivity and flexibility were influenced by the type of cellulose, and MC-PANI was found to have the best performance in the electrical conductivity and flexibility.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7272206 | PMC |
| http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0233952 | PLOS |
Publication Analysis
Top Keywords
Similar Publications
Occurrence and transport of per- and polyfluoroalkyl substances (PFAS) in the leachate of a municipal solid waste landfill in Tehran, Iran (a Middle-eastern megacity).
Environ Res
January 2025
Department of Environmental Engineering, Graduate Faculty of Environment, University of Tehran, 14155-6135, Tehran, Iran. Electronic address:
Per- and polyfluoroalkyl substances (PFAS) are present in a variety of products that are disposed in landfills as waste and end up in landfill leachate which cause severe problems. The primary aim of this study was to detect PFAS in generated leachate in different sections of a process and disposal complex (called Aradkuh) located in Tehran, Iran. Due to techno economic limitations of measuring PFAS in Iran and easiness of measuring physicochemical parameters to determine PFAS concentration as well as better understanding of the mechanisms of these substances releases from landfills, this research aimed to evaluate the potential relationship between these parameters in landfill leachate.
View Article and Find Full Text PDFLignocellulose nanofiber-enhanced hydrogel electrolytes with lignin-Al in metal-based neutral deep eutectic solvent for flexible supercapacitors.
J Colloid Interface Sci
January 2025
Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037 China. Electronic address:
The mechanical flexibility and high conductivity of hydrogel electrolytes are crucial for their application in supercapacitors. In this study, we developed hydrogel electrolyte based on lignocellulose nanofibers (LCNFs) through nanofibrillation and self-catalytic gelation in a glycerinum/choline chloride/aluminum chloride hexahydrate (Gly/ChCl/AlCl·6HO) metal-based neutral deep eutectic solvent (DES) system. The lignin-Al self-catalytic mechanism offered an eco-friendly and sustainable method for synthesizing hydrogel electrolytes, while enhancing their ionic conductivity.
View Article and Find Full Text PDFHigh Dimensionless Figure of Merit and Efficiency Thermoelectrics for Operation below Sub-250 °C─Origin of Colossal Seebeck Coefficient with Phonon Assisting, Coexistence with Electrical Conductivity, and Device Application for Their Multilayered Structure.
ACS Appl Mater Interfaces
January 2025
Clean Energy Research Center, University of Yamanashi, 4-3-11 Takeda, Kofu, Yamanashi 400-8511, Japan.
Thermoelectric (TE) devices recycle high-temperature waste-heat efficiently, but waste-heat below sub-250 °C remains uncaptured. As promoting full autonomy for the Internet of Things (IoT), we present a TE generator using multilayered pseudo--type GaN/TiN/GaN and -type TiO/TiN/TiO TE one-leg devices, where heterozygous of outer/inner layers demonstrates the functions of a colossal Seebeck coefficient ( = +15,000 μV K) with phonon-assist hopping, controlling by the porosity for reducing thermal conductivity (κ), a high electric conductivity (σ) with reducing κ by outer layers, and σ- coexistence over singular curve by the asymmetric electrode configuration. is elucidated hopping among inner grains and the space charge (SC) grain boundary (GB) of 100 μm regions within Debye length.
View Article and Find Full Text PDFHigh-Conductivity, Self-Healing, and Adhesive Ionic Hydrogels for Health Monitoring and Human-Machine Interactions Under Extreme Cold Conditions.
Adv Sci (Weinh)
January 2025
The Key Laboratory of Biomedical Information Engineering of Ministry of Education, School of Life Science and Technology, Xi'an Jiaotong University, Xi'an, 710049, P. R. China.
Ionic conductive hydrogels (ICHs) are emerging as key materials for advanced human-machine interactions and health monitoring systems due to their unique combination of flexibility, biocompatibility, and electrical conductivity. However, a major challenge remains in developing ICHs that simultaneously exhibit high ionic conductivity, self-healing, and strong adhesion, particularly under extreme low-temperature conditions. In this study, a novel ICH composed of sulfobetaine methacrylate, methacrylic acid, TEMPO-oxidized cellulose nanofibers, sodium alginate, and lithium chloride is presented.
View Article and Find Full Text PDFAmplifying Electron-Donor Signal of the "Water Gate" Enabled Low Detection Ability of a Field-Effect Transistor-Based Humidity Sensor.
Anal Chem
January 2025
School of Physics and Optoelectronics, Xiangtan University, Xiangtan 411105, PR China.
Low humidity detection down to the parts per million level is urgently demanded in various industrial applications. The hardly detected tiny electrical signal variations caused by a very small amount of water adsorption are one of the intrinsic reasons that restrain the detection limit of the humidity sensors. Herein, a carbon-based field-effect transistor (FET) humidity sensor utilizing adsorbed water as the dual function of a sensing gate and analyte was proposed.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!