A synthetic method was developed to enable the microwave-assisted solid-state preparation of double molybdate and double tungstate scheelite-type phosphors of formula NaRE(MO4)2 (RE = La, Pr, Eu, Dy; M = Mo, W). Starting from subgram-scale stoichiometric mixtures of metal carbonates and oxides and with the aid of granular activated charcoal as a microwave susceptor, ternary (NaEu(MO4)2), quaternary (NaLa0.95Eu0.05(MO4)2), and quinary phosphors (NaLa0.95Pr0.025Dy0.025(MO4)2) were obtained upon heating in a countertop microwave oven. The synthesis of crystalline and phase-pure materials required heating times ranging from 18 to 27 min, significantly shorter than those typically encountered in solid-state reactions assisted by conventional heating. Depending on chemical composition, the speed-up factor ranged from 30 to 40. More importantly, photoluminescence studies performed on the compositionally complex quinary molybdate NaLa0.95Pr0.025Dy0.025(MoO4)2 showed that phosphors synthesized using microwave and conventional heating have nearly identical luminescence responses. The synthetic method described in this contribution is robust, fast, simple, and ideally suited for exploratory synthesis and rapid screening of group VI metalate phosphors, as well as for the preparation of binary precursors to these materials (e.g., Na2MoO4 and Na2WO4).

Download full-text PDF

Source
http://dx.doi.org/10.1039/d0dt00999gDOI Listing

Publication Analysis

Top Keywords

microwave-assisted solid-state
8
synthetic method
8
conventional heating
8
phosphors
5
solid-state synthesis
4
synthesis naremo
4
naremo phosphors
4
phosphors synthetic
4
method developed
4
developed enable
4

Similar Publications

Enhancing Quasi-Solid-State Lithium-Metal Battery Performance: Multi-Interlayer, Melt-Infused Lithium and Lithiophilic Coating Strategies for Interfacial Stability in Li||VS-DSGNS-LATP|PEO-PVDF||NMC622-AlO Systems.

ACS Appl Mater Interfaces

January 2025

Advanced Functional Nanomaterials Research Laboratory, Centre for Nanoscience and Technology, Madanjeet School of Green Energy Technologies, Pondicherry University (A Central University), Dr. R. Venkataraman Nagar, Kalapet, Puducherry 605014, India.

The development of quasi-solid-state lithium metal batteries (QSSLMBs) is hindered by inadequate interfacial contact, poor wettability between electrodes and quasi-solid-state electrolytes, and significant volume changes during long-term cycling, leading to safety risks and cataclysmic failures. Here, we report an innovative approach to enhance interfacial properties through the construction of QSSLMBs. A multilayer design integrates a microwave-synthesized LiAlTi(PO) (LATP) ceramic electrolyte, which is surface-coated with a lithiophilic conductive ink comprising VS and disulfonated functionalized graphene nanosheets (VS-DSGNS) using a low-cost nail-polish binder.

View Article and Find Full Text PDF

Nano-sized high-entropy materials (HEMs) recently received more attention to researchers due to their superior electrochemical catalytic properties. HEMs comprise at least five elements with or without metals and are synthesized through solid-state reactions and solution-mediated techniques. The presence of many elements in these HEMs result in a high mixing entropy and facilitates the formation of stable solid solutions in fundamental crystal structures.

View Article and Find Full Text PDF

Blackcurrant pomace (BCP) is an example of an annual, high-volume, under-utilized renewable resource with potential to generate chemicals, materials and bioenergy within the context of a zero-waste biorefinery. Herein, the microwave-assisted isolation, characterization and potential application of defibrillated lignocelluloses from depectinated blackcurrant pomace are reported. Depectination was achieved using citric acid (0.

View Article and Find Full Text PDF

Effect of CNF ratio and pressure on structural and electrochemical performance of hybrid hydrogel for flexible free-standing electrode and sensors.

Carbohydr Polym

February 2025

State key laboratory base of eco-chemical Engineering, College of Chemical Engineering, Qingdao University of Science and Technology, 53 Zhengzhou Road, Qingdao, Shandong province 266042, PR China. Electronic address:

Article Synopsis
  • A 2D flexible hydrogel (GO/CNF) is created by combining graphene oxide (GO) with cellulose nanofiber (CNF) using microwave-assisted hydrothermal methods, resulting in a superhydrophilic material with a layered structure.
  • * The optimal mass ratio of GO to CNF is 3:1, leading to a specific capacitance of 295 F/g and improved electrochemical performance when used as free-standing electrodes in a three-electrode system.
  • * The enhanced properties of the hydrogel, especially at a press pressure that increases hydrophilicity, suggest its potential for use in flexible solid-state supercapacitors, wearable electronics, and biological signal detection with a high energy density of 20.6
View Article and Find Full Text PDF

The development of a rapid and convenient strategy to regulate the surface microenvironment of inert carbon supports, along with the physicochemical properties of their supported metal nanoparticles, is essential for enhancing catalytic performance. In this study, we describe a straightforward and efficient solid-state microwave method that utilizes a household microwave oven to achieve the co-doping of oxygen and nitrogen in unfunctionalized carbon black (ONCB) using urea as a nitrogen source. The microwave solid-state treatment of commercial carbon black (CB) with urea not only introduces a significant number of heteroatomic functional groups but also substantially increases the pore size and pore volume of the matrix.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!