Frequency Threshold for Ablation During Holmium Laser Lithotripsy: How High Can You Go?

We performed studies to assess the relationship of pulse frequency on stone ablation during contact laser lithotripsy and determine if there is a threshold after which its effect on lithotripsy is limited. BegoStones were fragmented using a Ho:YAG laser (P120 Moses) and a 230 μm fiber at 0.5 J on long pulse (LP) and Moses distance (MD) modes in contact with the stone. The relationship between the number of pulses (1-40 Hz) on stone crater volume was assessed using three-dimensional confocal microscopy and nonlinear-segmented regression. To simulate a painting technique, we assessed fragmentation (mg/second) at 20, 40, and 60 Hz, with the fiber moving at a speed of 1 and 3 mm/second, respectively. High-speed imaging was used to record ablation. When the laser fiber was fixed, after 13.0 (LP) and 15.4 (MD) pulses, greater pulse frequency did not lead to a significant increase in stone crater volume. Fragmentation was greatest at higher frequencies and faster fiber speed. Increasing the frequency from 20 to 60 Hz at 3 mm/second increased fragmentation by 82% and 61% for LP and MD modes, respectively. Using high-speed data, if the laser fiber is moving at 1 mm/second, a hypothetical frequency threshold for ablation was calculated to be 52 and 61.6 Hz for LP and MD modes, respectively. Increasing the fiber speed increases stone ablation when using high frequency settings. When the fiber is fixed there is a threshold after which increasing the pulse frequency leads to minimal gain in ablation. The exact value for threshold when the fiber is moving needs further study. Our study serves to provide insight for parameter selection and safety of laser lithotripsy for dusting technique.