Fabrication of cellulose-based adhesive composite as an active packaging material to extend the shelf life of cheese.

Int J Biol Macromol

Pre-treatment and Finishing of Cellulosic Fibers Department, Textile Research Division, National Research Centre (Scopus Affiliation ID 60014618), Dokki, Giza, Egypt.. Electronic address:

Published: October 2020

Traditional solutions of food packing are limited for antimicrobial packaging materials that interact with the product to inhibit the growth of microorganisms. In this work, adhesive composite was developed as an active packaging material using allyl isothiocyanate (AIC) in vapor phase. Such adhesive composite was made of gelatin electrospun fibers loaded by AIC and supportive adhesive sheet. Gelatin electrospun fibers loaded by AIC (2-10% v/v) into 24% wt/v gelatin solutions was produced using electrospinning apparatus at 15 kV, 15 cm air gap and 0.2 mL/h flow rate. This mat was supported by pressure-sensitive adhesive (PSA) made of hydroxyethyl cellulose backbone grafted by acrylic acid and methylbutyl acrylate [HEC-g-poly(AA-MBA)]. PSA was characterized in means of spectral, physicochemical and rheological analysis. Final product with AIC (2% v/v) showed significant antimicrobial activities against two food born bacteria including Staphylococcus aureus ATCC 25923 and Escherichia coli O157:H7. Antimicrobial activities on cheese showed that gelatin nanofibers loaded by AIC (10% v/v), applied in the headspace, extended the shelf life of cheese from 4 weeks to 8 weeks.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ijbiomac.2020.05.217DOI Listing

Publication Analysis

Top Keywords

adhesive composite
12
loaded aic
12
active packaging
8
packaging material
8
shelf life
8
life cheese
8
gelatin electrospun
8
electrospun fibers
8
fibers loaded
8
antimicrobial activities
8

Similar Publications

Light-curing of restorative composite through milled and 3D-printed full-contour zirconia for adhesive luting.

Dent Mater

January 2025

KU Leuven, Department of Oral Health Sciences, BIOMAT & UZ Leuven, Dentistry, Kapucijnenvoer 7, 3000 Leuven, Belgium. Electronic address:

Objectives: To evaluate the effect of different zirconia compositions and manufacturing processes on the light irradiance (LI), to measure the degree of conversion (DC) of solely light-curing restorative composite underneath these zirconia grades and to evaluate the respective zirconia microstructures.

Methods: Six dental zirconia grades (GC HT, GC UHT [GC]; Katana HT, Katana UTML [Kuraray Noritake]; Lava Esthetic, Lava Plus [3 M Oral Care]) were cut and sintered per manufacturer instructions. One 3D-printed zirconia grade (XJet [XJET]) was prepared according to previous research.

View Article and Find Full Text PDF

Objective:  Continuous advancements in composite resin materials have revolutionized and expanded its clinical use, improving its physical and mechanical properties. Attaining and retaining surface texture and gloss are crucial for the long-term durability of the composite resin material. This study investigated the supra-nanospherical filler composite material compared with different composite resin materials immersed in different beverages.

View Article and Find Full Text PDF

Dental implant coronal surfaces designed with the primary goal of maintaining crestal bone levels may also promote bacterial adhesion, leading to soft tissue inflammation and peri-implant bone loss. Achieving an optimal surface roughness that minimizes bacterial adhesion while preserving crestal bone is crucial. It is hypothesized that a specific threshold surface roughness value may exist below which, and above which, initial bacterial adhesion does not statistically change.

View Article and Find Full Text PDF

Background: The fracture of an endodontic instrument within the root canal system can occur during root canal therapy, complicating thorough cleaning and shaping. Consequently, managing the broken fragment becomes crucial.

Methods: Eighty Nickel-titanium (NiTi) #20 K-files (Mani, Tochigi, Japan) were cut 8 mm from the tip, fixed into a corkboard, and classified into five groups (n = 14 each).

View Article and Find Full Text PDF

Hydroxyapatite (HA) is an engineered biomaterial that closely resembles the hard tissue composition of humans. Biological HA is commonly non-stoichiometric and features lower crystallinity and higher solubility than stoichiometric HA. The chemical compositions of these biomaterials include calcium (Ca), phosphorus (P), and trace amounts of various ions such as magnesium (Mg), zinc (Zn), and strontium (Sr).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!