Glass recycling is a process that faces many obstacles, especially in the closed-loop context. Waste glass separation and transportation can become quite expensive, turning glass collection for remanufacture unfeasible. For this reason, it is important that alternative markets for waste glass are sought. This study evaluated crushed recycled glass as tertiary media in subsurface pilot-scale filters for on-site municipal wastewater treatment, using control sand media filters. Filters were operated over 128 days at a 24-h hydraulic retention time, treating secondary lagoon effluent from the rural municipality of Dunnottar, Manitoba, Canada. Crushed recycled glass filters removed 92%, 90% and 45% of the total suspended solids (TSS), ammonium nitrogen (NH-N) and chemical oxygen demand (COD), respectively. Total suspended solids were removed equally well in sand and crushed recycled glass filters ( = 0.05), whereas NH-N and COD reductions were 10% and 21% greater in sand media, respectively. Both sand and crushed recycled glass filters failed to achieve phosphorus (P) discharge guidelines. This study shows that there is potential for crushed recycled glass in wastewater filtration, especially to achieve TSS, COD and NH-N removal. Small communities served by waste stabilization ponds could benefit from glass media filters, as waste glass could be diverted from curbside collection and utilized locally to polish municipal lagoon effluent.

Download full-text PDF

Source
http://dx.doi.org/10.1080/09593330.2020.1775711DOI Listing

Publication Analysis

Top Keywords

crushed recycled
24
recycled glass
24
glass
12
waste glass
12
glass filters
12
glass tertiary
8
municipal lagoon
8
wastewater treatment
8
sand media
8
media filters
8

Similar Publications

Manufacturing water-stable carboxymethyl cellulose (CMC) films as an alternative to commercial plastics is a promising solution to address plastic pollution. In this study, waste walnut shell (WS) was used as a natural lignocellulosic filler, glycerol as a plasticizer, and citric acid (CA) as a crosslinking agent for preparing high-performance CMC-based bioplastics through a one-pot casting method. When WS content was 12 wt%, the obtained CWGA-12 after optimization exhibited excellent mechanical properties (tensile strength ≈18.

View Article and Find Full Text PDF

Battery technology has attained a key position as an energy storage technology in decarbonization of energy systems. Lithium-ion batteries have become the dominant technology currently used in consumer appliances, electric vehicles (EVs), and industrial applications. However, lithium-ion batteries are not alike and can have different cathode chemistries which makes their recycling more complex.

View Article and Find Full Text PDF

Study on Refined Crushing Technology of RAP and Mechanical Properties of RAP-Doped Cement-Stabilised Macadam Base.

Materials (Basel)

January 2025

Gansu Industry Technology Center of Transportation Construction Materials Research and Application, Lanzhou Jiaotong University, Lanzhou 730070, China.

In order to study the effect of the crushing process on the fine separation of reclaimed asphalt pavement (RAP) and the mechanical properties of cement-stabilised aggregate mixed with RAP, four crushing processes, namely small mesh hammer crushing, hammer crushing, jaw crushing, and double roller crushing, were used to separate the aggregate from asphalt in RAP materials. The effect of crushing on the grading characteristics and agglomeration condition of RAP material was investigated. RAP cement-stabilised aggregates were prepared and analysed for their mechanical properties and micro-morphology using RAP materials obtained from fine separation.

View Article and Find Full Text PDF

Utilizing Crushed Recycled Marble Stone Powder as a Sustainable Filler in SBS-Modified Asphalt Containing Recycled Tire Rubber.

Polymers (Basel)

December 2024

Faculty of Civil Engineering, Nguyen Tat Thanh University, 300A Nguyen Tat Thanh Street, District 4, Ho Chi Minh City 700000, Vietnam.

The increasing demand for sustainable construction materials has driven the exploration of alternative fillers in asphalt production. Traditional asphalt mixtures rely heavily on natural aggregates and petroleum-based binders, contributing to environmental degradation. This study proposes an innovative solution by utilizing Crushed Recycled Marble Stone Powder (CRMSP) as a sustainable filler in SBS polymer-modified asphalt containing high volumes of recycled tire rubber, addressing both resource depletion and waste management concerns.

View Article and Find Full Text PDF

The paper deals with an analysis of the amount of 16 polycyclic aromatic hydrocarbons (PAHs (Polycyclic aromatic hydrocarbons-16 defined by US EPA.)) released from reclaimed asphalt mixtures used in base layers of road surfaces and in binder layers in road construction using cold in-place recycling. For the ten samples tested, the sum of 16 PAHs was determined directly for the crushed asphalt mixture and for its 24-h leachate.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!