Open source, low-cost device for thermometric titration with non-contact temperature measurement.

This work proposes a simple device for thermometric titration using a contactless sensor. A low-cost infrared sensor (around $5) was adapted in a disposable, polystyrene vessel for monitoring the temperature to determine the endpoint of neutralization, redox, and complexation titrations, using a homemade syringe pump to titration control. Open-source software was developed to control the device using the Raspberry Pi platform and to perform automatic endpoint determination. The influence of sample volume, the flow rate of titrant, and sensor distance from the solution were evaluated to lower the variation among measurements. The parameters chosen in this regard were 10 mL of sample, 0.8 mL min of titrant solution flow rate, and 3 cm of distance from the sensor to the solution. Results for the determination of the acidity of sauces and the ascorbic acid and calcium content of pharmaceutical products were compared with those from official compendia. The performance of the sensor also was compared with an infrared camera. The proposed method agreed with conventional ones to an extent ranging from 93% to 106%. The robust analytical performance and low cost of the system are essential features that could broaden the use of enthalpimetric analysis in several laboratories.