Aimed at effectively controlling coal dust pollution in the mining face of a coal mine, this study first conducted a theoretical analysis and then combined a spraying experiment and a numerical simulation to perform an in-depth examination of the atomizing characteristics and dust suppression performance of a coal cutter external spraying device. Based on the experimental spraying results, the optimal nozzle was determined to be a pressure round-mouth nozzle with an X-shaped core. The characteristics of the spray fields from nozzles of different calibers (1.6, 2.0 and 2.4 mm) at different spraying pressures (2, 4, 6 and 8 MPa) were then analyzed. It was found that the droplet concentration in the spray field increased with increasing spraying pressure and nozzle caliber. The droplet diameter was mainly dependent on the spraying pressure and varied more slowly with increased spraying pressure. At a spraying pressure of 8 MPa, the spray field formed could achieve effective dust suppression; specifically, the droplet concentration in the spray field was mostly more than 15 g/m, and the droplet size was mainly distributed in the range of 30-100 μm. When using a 2.4 mm caliber nozzle, the dust concentration measured around the coal cutter operator was reduced to 87.21 mg/m under a spraying pressure of 8 MPa, suggesting adequate dust suppression.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.envpol.2020.114717 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Scale-up of Microdroplet Reactors for Efficient CO Resource Utilization.
J Am Chem Soc
January 2025
MOE Key Laboratory of Mesoscopic Chemistry, Nanjing University, Nanjing, Jiangsu 210023, China.
Two-phase reactions involving microdroplets have gained significant attention in recent years due to their unique ability to catalyze and accelerate reactions that typically do not occur under standard conditions by leveraging chemical and physical effects at the micrometer-scale interface. In this work we have innovatively developed a scaled-up microdroplet reactor for the efficient resource utilization of CO. The reaction liquid is sprayed in the form of mist ( < 20 μm), facilitating complete contact and reaction with gaseous CO.
View Article and Find Full Text PDFIntranasal racemic ketamine maintenance therapy for patients with treatment-resistant depression: a naturalistic feasibility study.
BMC Psychiatry
January 2025
Department of Psychiatry, College of Medicine, University of Saskatchewan, Saskatoon, SK, Canada.
Background: Ketamine is a promising therapy for treatment-resistant depression due to its rapid onset, although benefits are often transitory, with patients needing maintenance therapy to prevent relapse. Most data supporting ketamine for treatment-resistant depression refers to the intravenous route of administration, leaving alternative routes lacking in data, especially as maintenance regimens. Moreover, the safety of ketamine maintenance therapy is poorly defined.
View Article and Find Full Text PDFFabrication of Polytetrafluoroethylene-Reinforced Fluorocarbon Composite Coatings and Tribological Properties Under Multi-Environment Working Conditions.
Polymers (Basel)
December 2024
School of Mechanical and Electrical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Currently, few studies have been conducted on the use of fluorocarbon resin (FEVE) and polytetrafluoroethylene (PTFE) as adhesive substrates and lubricating and anti-corrosion fillers, respectively, for the fabrication of PTFE-reinforced fluorocarbon composite coatings. In this paper, the tribological properties of polytetrafluoroethylene-reinforced fluorocarbon composite coatings were investigated through orthogonal tests under various operating conditions. The optimal configuration for coating preparation under dry friction and aqueous lubrication was thus obtained: the optimal filler particle size, mass ratio of FEVE to PTFE, spraying pressure, and curing agent content were 50 μm, 3:4.
View Article and Find Full Text PDFImproving agricultural spraying with multi-rotor drones: a technical study on operational parameter optimization.
Front Nutr
December 2024
Directorate of Crop Management, Tamil Nadu Agricultural University, Coimbatore, India.
Article Synopsis
- Drones are improving nutrient management by allowing precise spraying techniques, which are especially important under climate change.
- Current research focuses on optimizing various parameters like flight height, pressure, and nozzle configuration to enhance spray efficiency and reduce waste.
- The study found that a hover height of 2.0 meters provided the best spray uniformity and distribution, showing the effectiveness of careful drone operation in agricultural practices.
Design of an intelligent disinfection control system based on an STM32 single-chip microprocessor by using the YOLO algorithm.
Sci Rep
December 2024
College of Mechanical and Electronic Engineering, Dalian Minzu University, Dalian, 116650, Liaoning, China.
The novel coronavirus (COVID-19) has affected more than two million people of the world, and far social distancing and segregated lifestyle have to be adopted as a common solution in recent years. To solve the problem of sanitation control and epidemic prevention in public places, in this paper, an intelligent disinfection control system based on the STM32 single-chip microprocessor was designed to realize intelligent closed-loop disinfection in local public places such as public toilets. The proposed system comprises seven modules: image acquisition, spraying control, disinfectant liquid level control, access control, voice broadcast, system display, and data storage.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!