Aim: This study was conducted to evaluate the effect of three nanoparticle solutions used as final root canal irrigants on the fracture resistance of endodontically treated roots.
Materials And Methods: Sixty intact single-rooted premolar teeth were used after removing the crowns below the cementum-enamel junction to standardize the length of the remaining roots to 13 mm. After instrumenting the roots using ProTaper Universal rotary instruments up to size F4, the roots were randomly divided into six groups (n=10) according to the final irrigating solutions: Group 1: normal saline; Group 2: 2% chlorhexidine (CHX); Group 3: 17% EDTA+2.5% NaOCl; Group 4: 17% EDTA+0.1% silver nanoparticle (SNP) solution; Group 5: 17% EDTA+0.1% titanium dioxide nanoparticle (TNP) solution; Group 6: 17% EDTA+0.1% zinc oxide nanoparticle (ZNP) solution. After filling the root canals with gutta-percha and AH Plus sealer, the fracture resistance (FR) values were measured. The data were subjected to the one-way analysis of variance and the Tamhane post hoc test (p=0.05).
Results: EDTA + NaOCl had the lowest FR value, followed by normal saline and CHX (p values < 0.05). No significant difference was found between the FR of roots irrigated with CHX and normal saline (p > 0.05). The application of nanoparticles (SNP, TNP, and ZNP) was associated with a significantly greater FR than that of other irrigation solutions (p values < 0.05).
Conclusion: The final irrigation of root canals with nanoparticles enhanced the fracture resistance of the endodontically treated roots. The lowest FR value was observed for NaOCl.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7184859 | PMC |
http://dx.doi.org/10.2147/CCIDE.S253251 | DOI Listing |
Int J Biol Macromol
January 2025
Hainan Key Laboratory of Storage & Processing of Fruits and Vegetables, Agricultural Products Processing Research Institute of Chinese Academy of Tropical Agricultural Sciences, Zhanjiang 524001, China. Electronic address:
Manufacturing water-stable carboxymethyl cellulose (CMC) films as an alternative to commercial plastics is a promising solution to address plastic pollution. In this study, waste walnut shell (WS) was used as a natural lignocellulosic filler, glycerol as a plasticizer, and citric acid (CA) as a crosslinking agent for preparing high-performance CMC-based bioplastics through a one-pot casting method. When WS content was 12 wt%, the obtained CWGA-12 after optimization exhibited excellent mechanical properties (tensile strength ≈18.
View Article and Find Full Text PDFArch Phys Med Rehabil
January 2025
Exercise Intervention for Health Research Group (EXINH-RG), Department of Physiotherapy, University of Valencia, 46010 Valencia, Spain; National Research Centre for the Working Environment, Copenhagen, Denmark.
Objective: To examine the effects on strength, pain intensity, range of motion (ROM), and functionality of a 12-week dual-task resistance exercise program in patients undergoing rehabilitation from elbow fractures.
Design: Randomized Controlled Trial SETTING: Rehabilitation hospital.
Participants: Individuals undergoing elbow fracture rehabilitation.
Mol Divers
January 2025
State Key Laboratory of Green Pesticide, Center for R&D of Fine Chemicals, Guizhou University, Guiyang, 550025, China.
A series of flavonoid derivatives containing piperazine sulfonate were designed and synthesized. The results of antiviral experiments in vivo showed that some target compounds had good inhibitory effect on tobacco mosaic virus (TMV). The EC values of S15 and S19 curative activity were 174.
View Article and Find Full Text PDFOral Health Prev Dent
January 2025
Purpose: This in-vitro study was conducted to assess the fracture resistance of resin-bonded ceramic endocrowns with different designs at varying intracoronal depths.
Materials And Methods: Forty-eight (n = 48) extracted mandibular first molar teeth were randomly divided into four groups (n = 12). In the control group, the specimens remained untreated.
Heliyon
January 2025
Portsmouth Centre for Advanced Materials and Manufacturing (PCAMM), School of Electrical and Mechanical Engineering, University of Portsmouth, Portsmouth, PO1 3DJ, UK.
This paper investigates the damage resistance and tolerance of thermoset composite laminates stitched by glass and hybrid glass/polypropylene commingled yarns. Different impact energies (10-70 J) were applied to stitched composite laminates before compression after impact (CAI) tests were conducted. The results showed that, except for 70J, commingled yarn-stitched laminates absorbed more energy than glass-stitched laminates.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!