Direct Fabrication of Freestanding and Patterned Nanoporous Junctions in a 3D Micro-Nanofluidic Device for Ion-Selective Transport.

In the field of micro-nanofluidics, a freestanding configuration of a nanoporous junction is highly demanded to increase the design flexibility of the microscale device and the interfacial area between the nanoporous junction and microchannels, thereby improving the functionality and performance. This work first reports direct fabrication and incorporation of a freestanding nanoporous junction in a microfluidic device by performing an electrolyte-assisted electrospinning process to fabricate a freestanding nanofiber membrane and subsequently impregnating the nanofiber membrane with a nanoporous precursor material followed by a solidification process. This process also enables to readily control the geometry of the nanoporous junction depending on its application. By these advantages, vertically stacked 3D micro-nanofluidic devices with complex configurations are easily achieved. To demonstrate the broad applicability of this process in various research fields, a reverse electrodialysis-based energy harvester and an ion concentration polarization-based preconcentrator are produced. The freestanding Nafion-polyvinylidene fluoride nanofiber membrane (F-NPNM) energy harvester generates a high power (59.87 nW) owing to the enlarged interfacial area. Besides, 3D multiplexed and multi-stacked F-NPNM preconcentrators accumulate multiple preconcentrated plugs that can increase the operating sample volume and the degree of freedom of handling. Hence, the proposed process is expected to contribute to numerous research fields related to micro-nanofluidics in the future.