Thermal stabilities of four major components (-menthol, -menthone, piperitone, and -menthyl acetate) of Japanese mint essential oil were evaluated via subcritical water treatment. To improve experimental throughput for measuring compound stabilities, a small-scale subcritical water treatment method using ampoule bottles was developed and employed. A mixture of the four major components was treated in subcritical water at 180-240 °C for 5-60 min, and then analyzed by gas chromatography. The results indicated that the order of thermal resistance, from strongest to weakest, was: -menthyl acetate, -menthol, piperitone, and -menthone. In individual treatments of mint flavor components, subsequent conversions of -menthyl acetate to -menthol, -menthol to -menthone, -menthone to piperitone, and piperitone to thymol were observed in individual treatments at 240 °C for 60 min. As the mass balance between piperitone and thymol was low, the hydrothermal decomposition of the components was considered to have occurred intensely during, or after the conversion. These results explained the degradation of mint essential oil components under subcritical water conditions and provided the basis for optimizing the extraction conditions of mint essential oils using subcritical water.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7221780 | PMC |
http://dx.doi.org/10.3390/molecules25081953 | DOI Listing |
Foods
January 2025
Research Center for Traditional Medicine and History of Medicine, Department of Persian Medicine, School of Medicine, Shiraz University of Medical Sciences, Shiraz 7134845794, Iran.
Lavender is one of the most appreciated aromatic plants, with high economic value in food, cosmetics, perfumery, and pharmaceutical industries. Lavender essential oil (LEO) is known to have demonstrative antimicrobial, antioxidant, therapeutic, flavor and fragrance properties. Conventional extraction methods, e.
View Article and Find Full Text PDFMolecules
January 2025
Foodomics Laboratory, Institute of Food Science Research (CIAL) (CSIC-UAM), Nicolás Cabrera 9, 28049 Madrid, Spain.
Propolis is a valuable natural resource for extracting various beneficial compounds. This study explores a sustainable extraction approach for Brazilian green propolis. First, supercritical fluid extraction (SFE) process parameters were optimized (co-solvent: 21.
View Article and Find Full Text PDFNat Commun
January 2025
State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin, 150090, P. R. China.
Oil spill disasters lead to widespread and long-lasting social, economical, environmental and ecological impacts. Technical challenges remain for conventional static adsorption due to hydrodynamic instability under complex water-flow conditions, which results in low oil-capture efficiency, time delay and oil escape. To address this issue, we design a vortex-anchored filter inspired by the anatomy of deep-sea glass sponges (E.
View Article and Find Full Text PDFSci Total Environ
January 2025
Department of Chemical Engineering, Federal University of Santa Maria, 1000, Roraima Avenue, Santa Maria, RS 97105-900, Brazil. Electronic address:
Lignocellulosic waste, like corn stover (CS), is widely produced and serves as a key feedstock for biofuels and biochemicals. Semi-continuous subcritical water hydrolysis (SWH) is an eco-friendly method that breaks down cellulose and hemicellulose bonds. To boost fermentable sugar (FS) yields, steam explosion (SE) pretreatment was tested on CS, achieving a cellulose content of 74.
View Article and Find Full Text PDFJ Hazard Mater
December 2024
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China.
Global concern over per- and polyfluoroalkyl substances (PFASs), especially perfluorooctane sulfonate (PFOS), disposal prompts the search for effective degradation methods. Subcritical water hydrothermal treatment shows promise but suffers from unclear degradation pathways, hindering engineering application design due to unknown intermediate products. This study introduces Fe-based amorphous alloy to enhance the subcritical water hydrothermal degradation of PFOS, achieving a degradation rate of approximately 85 % under optimized conditions of 325 °C and 1 M sodium bicarbonate (NaHCO₃), compared to 56 % without the alloy.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!