Effect of proximal balloon edge dilation technique for opening a side branch ostium in repetitive-proximal optimizing technique sequence.

Objective: The purpose of this experimental bench test was to compare stent deformation, obstruction of stent struts at a jailed side branch (SB) ostium, and stent strut malapposition between SB inflation using proximal balloon edge dilation (PBED) technique and SB inflation using conventional balloon dilation in repetitive-proximal optimizing technique (re-POT) sequence.

Background: The second proximal optimizing technique (POT) procedure in the re-POT sequence might increase obstruction of stent struts at a jailed SB ostium, because deformation of stent cells at the main branch (MB) occurred during SB inflation for opening the SB ostium.

Methods: A fractal coronary bifurcation bench model made of flexible urethane was used, and crossover single-stent implantation (Xience Sierra, Abbott Vascular, Santa Clara, CA, n = 12) was performed from the MB with the re-POT sequence. During the re-POT sequence, the jailing rate at the SB ostium assessed by videoscopy was compared between SB inflation using PBED technique (PBED group, n = 6) and SB inflation using conventional balloon dilation (conventional group, n = 6).

Results: The jailing rate after the second POT procedure tended to be lower in the PBED group than in the conventional group (26 ± 12% vs. 34 ± 8%, p = .211), and the change in the jailing rate during the second POT procedure was significantly smaller in the PBED group than in the conventional group (4.8 ± 5.3% vs. 11.6 ± 3.5%, p = .026).

Conclusions: In the re-POT sequence, the PBED technique with a short balloon for SB inflation might minimize worsening of the jailing rate at the SB ostium during the second POT procedure.