A one-micron pixel pitch is believed to be required for spatial light modulators (SLMs) to realize holographic displays possessing a wide viewing zone. This study proposes the use of a microelectromechanical systems (MEMS) SLM for not only displaying holographic patterns but also scanning laser beam. During the rotation of MEMS mirrors in the MEMS SLM, the timing of laser pulses illuminating the MEMS SLM is controlled to change the reflection direction of light modulated by the MEMS SLM in order to enlarge the viewing zone. In this technique, the width of the viewing zone depends on the rotation angle of MEMS mirrors, and not on the pitch of pixels (MEMS mirrors). We experimentally demonstrated the enlargement of the viewing zone angle to ∼40° using the MEMS SLM with a pixel pitch of 13.68 µm.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.385645 | DOI Listing |
Nanophotonics
November 2024
State Key Laboratory of Optical Communication Technologies and Networks, China Information Communication Technologies Group Corporation (CICT), Wuhan, China.
Beam-steered infrared (IR) light communication has gained tremendous attention as one of the solutions of congested wireless communication traffic. High performance active beam-steering devices play a crucial role in data allocation and exchange. Conventional beam-steering devices such as spatial light modulator (SLM) and micro-electrical mechanical system (MEMS) mirror and the current emerging nonmechanical beam-steering metasurface-based devices are challenging to realize a large tunable steering angle beyond several degrees, which significantly hinders the spatial application of optical wireless communications (OWC).
View Article and Find Full Text PDFMicromachines (Basel)
September 2022
James C. Wyant College of Optical Science, University of Arizona, 1630 E. University Blvd., Tucson, AZ 85719, USA.
Real-time, simultaneous, and adaptive beam steering into multiple regions of interest replaces conventional raster scanning with a less time-consuming and flexible beam steering framework, where only regions of interest are scanned by a laser beam. CUDA-OpenGL interoperability with a computationally time-efficient computer-generated hologram (CGH) calculation algorithm enables such beam steering by employing a MEMS-based phase light modulator (PLM) and a Texas Instruments Phase Light Modulator (TI-PLM). The real-time CGH generation and display algorithm is incorporated into the beam steering system with variable power and scan resolution, which are adaptively controlled by camera-based object recognition.
View Article and Find Full Text PDFFront Neurosci
May 2022
School of Applied and Engineering Physics, Cornell University, Ithaca, NY, United States.
Three-photon microscopy (3PM) was shown to allow deeper imaging than two-photon microscopy (2PM) in scattering biological tissues, such as the mouse brain, since the longer excitation wavelength reduces tissue scattering and the higher-order non-linear excitation suppresses out-of-focus background fluorescence. Imaging depth and resolution can further be improved by aberration correction using adaptive optics (AO) techniques where a spatial light modulator (SLM) is used to correct wavefront aberrations. Here, we present and analyze a 3PM AO system for mouse brain imaging.
View Article and Find Full Text PDFHigh-speed spatial modulation of light is the key technology in various applications, such as optical communications, imaging through scattering media, video projection, pulse shaping, and beam steering, in which spatial light modulators (SLMs) are the underpinning devices. Conventional SLMs, such as liquid crystal (LC), digital micromirror device (DMD), and micro-electro-mechanical system (MEMS) ones, operate at a typical speed on the order of several kilohertz as limited by the slow response of the pixels. Achieving high-speed spatial modulation is still challenging and highly desired.
View Article and Find Full Text PDFOrders-of-magnitude increases are desired in the pixel count and density of spatial light modulators (SLMs) for next-gen displays. We present in-plane and simultaneous angular-spatial light modulation by a micro electro mechanical system (MEMS)-based SLM, a digital micromirror device (DMD), to generate gigapixel output by time and angular multiplexing. Pulsed illumination synchronized to the micromirror actuation achieves pixel-implemented and diffraction-based angular modulation, and source multiplexing increases angular selectivity.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!