Ultrahigh molecular weight (UHMW) poly(ethylene oxide) (PEO) is a synthetic hydrophilic polymer with wide dispersity which shows considerable promise as a hemostatic agent in the treatment of gastrointestinal bleeding. Currently there is no analytical method for the determination of highly disperse UHMW PEO in biological samples that would allow its characterization in vivo and support its clinical development. Although liquid chromatography-tandem mass spectrometry (LC-MS/MS) is a powerful bioanalytical tool, it faces major challenges when applied to UHMW PEO. In this work, we report a novel bioanalytical method for the determination of UHMW PEO involving microsolid phase extraction (μ-SPE), chromatography on a PLRP-S 1000 Å reversed phase column and detection by positive ion Q-Q-TOF MS using the MS technique. In this mode, dissociation of all precursor ions in Q2 generated a series of product ions at / 89.0715, 133.0854, 177.1047, and 221.1475 of which the product ion at / 133.0854 was common to all precursor ions and enabled quantitation of all polymers in UHMW PEO. The method was successfully applied to the determination of UHMW PEO polymers in rat plasma, urine, and feces after oral administration of 1700 kDa PEO. The results show that UHMW PEO is not absorbed into the blood and is largely eliminated unchanged in feces over 48 h. We maintain the method is sufficiently robust to be used in routine bioanalysis of polymers with UHMW and wide dispersity.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.analchem.0c00189DOI Listing

Publication Analysis

Top Keywords

uhmw peo
24
ultrahigh molecular
8
molecular weight
8
highly disperse
8
polyethylene oxide
8
microsolid phase
8
phase extraction
8
uhmw
8
peo
8
wide dispersity
8

Similar Publications

Ionic Conductivity Enhancement in UHMW PEO Gel Electrolytes Based on Room-Temperature Ionic Liquids and Deep Eutectic Solvents.

ACS Appl Polym Mater

April 2022

Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Juan de la Cierva 3, 28006 Madrid, Spain.

Physical gels made of poly(ethylene oxide) (PEO) and deep eutectic solvents urea-Li bis(trifluoromethanesulfonyl)imide (TFSI) and ethylene glycol/LiTFSI, or pyrrolidinium ionic liquid solutions PYR13TFSI-LiTFSI and PYR14TFSI-LiTFSI, are prepared by a fast, single-step process, which involves no auxiliary solvents or intermediates and is reproducible and scalable. The properties of these gels are studied as a function of the PEO content and its molecular weight and the nature of the liquid electrolyte. The gels prepared with a low concentration (1-5 wt %) of ultrahigh molecular weight (UHMW) PEO are tough, stretchable materials which resemble soft elastomers and are also self-healing and transparent.

View Article and Find Full Text PDF

The rheology of ultra-high molecular weight poly(ethylene oxide) dispersed in a low molecular weight carrier.

Phys Fluids (1994)

February 2022

Department of Chemical Engineering, Virginia Tech, Blacksburg, Virginia 24061, USA.

Gel spinning is the industrial method of choice for combining hydrophilic ultra-high molecular weight (UHMW) polymer resins with a hydrophobic support polymer to produce composite filaments for cytapheresis. Cytapheresis is a medical technique for removal of leukocytes from blood. Gel spinning is used to avoid high melt viscosity and thermal sensitivity of UHMW resins and the high melt temperature of the substrate resin but requires the recovery of toxic solvents.

View Article and Find Full Text PDF

Addressing Manufacturability and Processability in Polymer Gel Electrolytes for Li/Na Batteries.

Polymers (Basel)

June 2021

Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Juan de la Cierva 3, 28006 Madrid, Spain.

Gel electrolytes are prepared with Ultra High Molecular Weight (UHMW) polyethylene oxide (PEO) in a concentration ranging from 5 to 30 wt.% and Li- and Na-doped 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (PYR14-TFSI) by a simple procedure consisting of dissolving PEO by melting it directly in the liquid electrolyte while stirring the blend. This procedure is fast, reproducible and needs no auxiliary solvents, which makes it sustainable and potentially easy to scale up for mass production.

View Article and Find Full Text PDF

Understanding the Molecular Structure of the Elastic and Thermoreversible AlCl  : Urea/Polyethylene Oxide Gel Electrolyte.

ChemSusChem

October 2020

Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Calle Juan de la Cierva 3, 28006, Madrid, Spain.

It is possible to prepare elastic and thermoreversible gel electrolytes with significant electroactivity by dissolving minimal weight fractions of ultra-high molecular weight polyethylene oxide (UHMW PEO) in an aluminum deep eutectic solvent (DES) electrolyte composed of AlCl and urea at a molar ratio of 1.5 : 1 (AlCl /urea). The experimental vibrational spectra (FTIR and Raman) provide valuable information on the structure and composition of the gel electrolyte.

View Article and Find Full Text PDF

Tough Polymer Gel Electrolytes for Aluminum Secondary Batteries Based on Urea: AlCl, Prepared by a New Solvent-Free and Scalable Procedure.

Polymers (Basel)

June 2020

Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC), Calle Juan de la Cierva 3, 28006 Madrid, Spain.

Polymer gel electrolytes have been prepared with polyethylene oxide (PEO) and the deep eutectic mixture of AlCl: urea (uralumina), a liquid electrolyte which has proved to be an excellent medium for the electrodeposition of aluminum. The polymer gel electrolytes are prepared by mixing PEO in the liquid electrolyte at T > 65 °C, which is the melting point of PEO. This procedure takes a few minutes and requires no subsequent evaporation steps, being a solvent-free, and hence more sustainable procedure as compared to solvent-mediated ones.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!