Poly(hydroxymethylated-3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT-MeOH:PSS) conducting polymers are synthesized and incorporated in inverted structured perovskite solar cells (PVSCs) as hole transport materials. The highest occupied molecular orbital of PEDOT-MeOH is lowered by adding a hydroxymethyl (-MeOH) functional group to ethylenedioxythiophene (EDOT), and thus, the work function of PEDOT-MeOH:PSS is increased. Additionally, hydrogen bonding can be formed among EDOT-MeOH monomers and between EDOT-MeOH monomers and sulfate groups on PSS, which promotes PEDOT-MeOH chain growth and enhances PSS doping. The electronic, microstructural, and surface morphological properties of PEDOT-MeOH:PSS are modified by changing the amounts of PSS and the ferric oxidizing agent used in the polymerization and by adding ethylene glycol in the postsynthesis treatment. The PVSCs based on ethylene-glycol-treated PEDOT-MeOH:PSS overperform the PVSCs based on commercial PEDOT:PSS because of the better energetic alignment and the enhancement of PEDOT-MeOH:PSS electrical conductivity. This work opens the way to develop new hole transport materials for highly efficient inverted PVSCs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.0c01756 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrochemical and Spectro-Microscopic Analyses of Charge Accumulation and Ion Migration in Dry Processed Perovskite Solar Cells under Electrical Biasing.
J Phys Chem Lett
January 2025
Synchrotron SOLEIL, L'Orme des Merisiers, Départementale 128, 91190 Saint-Aubin, France.
We study the influence of electrical biasing on the modification of the chemical composition and electrical performance of perovskite solar cells (PSCs) by coupling electrochemical impedance spectroscopy (EIS) and scanning transmission X-ray microscopy (STXM) techniques. EIS reveals the formation of charge accumulation at the interfaces and changes in the resistive and capacitive properties. STXM study on PSCs after applying a strong electric field for a long biasing time indicates the breakdown of methylammonium (MA) cation, promoting iodide ions to migrate and create defects at the interface.
View Article and Find Full Text PDFTransition of Perovskite Solar Technologies to Being Flexible.
Adv Mater
January 2025
Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC, 27599, USA.
Perovskite technologies has taken giant steps on its advances in only a decade time, from fundamental science to device engineering. The possibility to exploit this technology on a thin flexible substrate gives an unbeatable power to weight ratio compares to similar photovoltaic systems, opening new possibilities and new integration concepts, going from building integrated and applied photovoltaics (BIPV, BAPV) to internet of things (IoT). In this perspective, the recent progress of perovskite solar technologies on flexible substrates are summarized, focusing on the challenges that researchers face upon using flexible substrates.
View Article and Find Full Text PDFInsights Into the Local Heating Effects in Triple-Cation Mixed-Halide Perovskite Cells: Charge Dynamics, Coherent Phonons, Anion Segregation.
Small
January 2025
Faculty of Physics and Astronomy, Adam Mickiewicz University, Poznan, 61-614, Poland.
The behavior of triple-cation mixed halide perovskite solar cells (PSCs) under ultrashort laser pulse irradiation at varying fluences is investigated, with a focus on local heating effects observed in femtosecond transient absorption (TA) studies. The carrier cooling time constant is found to increase from 230 fs at 2 µJ cm⁻ to 1.3 ps at 2 mJ cm⁻ while the charge population decay accelerates from tens of nanoseconds to the picosecond range within the same fluence range.
View Article and Find Full Text PDFThe Effect of Antisolvent Treatment on the Growth of 2D/3D Tin Perovskite Films for Solar Cells.
ACS Energy Lett
January 2025
Department of Chemistry and Centre for Processable Electronics, Molecular Sciences Research Hub, Imperial College London, London W12 0BZ, U.K.
Antisolvent treatment is used in the fabrication of perovskite films to control grain growth during spin coating. We study widely incorporated aromatic hydrocarbons and aprotic ethers, discussing the origin of their performance differences in 2D/3D Sn perovskite (PEAFASnI) solar cells. Among the antisolvents that we screen, diisopropyl ether yields the highest power conversion efficiency in solar cells.
View Article and Find Full Text PDFMitigation of Self-p-Doping and Off-Centering Effect in Tin Perovskite via Strontium Doping.
ACS Energy Lett
January 2025
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Hahn-Meitner Platz 1, 14109 Berlin, Germany.
Tin-based perovskite solar cells offer a less toxic alternative to their lead-based counterparts. Despite their promising optoelectronic properties, their performances still lag behind, with the highest power conversion efficiencies reaching around 15%. This efficiency limitation arises primarily from electronic defects leading to self-p-doping and stereochemical activity of the Sn(II) ion, which distorts the atomic arrangement in the material.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!