Graphene aerogel (GA) is a lightweight, porous, environmentally friendly, 3D structured material with interesting properties, such as electrical conductivity, a high surface area, and chemical stability, which make it a powerful tool in energy storage, sensing, catalyst support, or environmental applications. However, the poor mechanical stability that often characterizes graphene aerogels is a serious obstacle for their use in such applications. Therefore, we report here the successful mechanical reinforcement of GA with carbon fibers (CFs) by combining reduced graphene oxide (rGO) and CFs in a composite material. The surfaces of the CFs were first successfully desized and enriched with epoxy groups using epichloridrine. Epoxy-functionalized CFs (epoxy-CFs) were further covered by reduced graphene oxide (rGO) nanosheets, using triethylene tetramine (TETA) as a linker. The rGO-covered CFs were finally incorporated into the GA, affording a stiff monolithic aerogel composite. The as-prepared epoxy-CF-reinforced GA was characterized by spectroscopic and microscopic techniques and showed enhanced electrical conductivity and compressive strength. The improved electrical and mechanical properties of the GA-CFs composite could be used, among other things, as electrode material or strain sensor applications.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7144468 | PMC |
| http://dx.doi.org/10.3390/molecules25061295 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Studying the Size-Dependence of Graphene Nanoplatelets (GNPs) in the Final Properties of Polyurethane Aerogels: Thermal Insulation and Mechanical Strength.
Gels
January 2025
Cellular Materials Laboratory (CellMat), Condensed Matter Physics Department, Faculty of Science, Campus Miguel Delibes, University of Valladolid, Paseo de Belén 7, 47011 Valladolid, Spain.
In the present work, the influence of the addition of graphene nanoplatelets presenting different dimensions on polyurethane-polyisocyanurate aerogel structure and properties has been studied. The obtained aerogels synthesized through a sol-gel method have been fully characterized in terms of density, porosity, specific surface area, mechanical stiffness, thermal conductivity, and speed of sound. Opacified aerogels showing high porosity (>92%) and low densities (78-98 kg/m) have been produced, and the effect of the size and content of graphene nanoplatelets has been studied.
View Article and Find Full Text PDFGraphene aerogels with high surface areas, ultra-low densities, and thermal conductivities have been attracted a lot of attention in recent years. However, considerable difference in their deformation behavior and mechanical properties lead to their poor performance. The problem can be solved by preparing graphene aerogel of given morphology and by control the properties through the special structure of graphene cells.
View Article and Find Full Text PDFLotus-inspired cellulose-based aerogel with Janus wettability and vertically aligned vessels for salt-rejecting solar seawater purification.
Carbohydr Polym
March 2025
Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing 100084, PR China. Electronic address:
High-performance solar interface evaporators provide a promising, sustainable, and cost-effective solution to the global freshwater crisis through seawater purification. However, achieving a delicate balance between maximizing the evaporation rate and ensuring continuous, stable, and durable operation presents a critical challenge. Herein, we present a biomimetic cellulose/polypyrrole-coated silica/graphene evaporator with self-assembled nanofiber networks and vertically aligned vessels for enhanced salt resistance.
View Article and Find Full Text PDFNitrogen-Doped Graphene Aerogel toward Efficient Solar Steam Generation: Synergistic Effects of Thermal Conductivity and Wettability.
Langmuir
January 2025
College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China.
Solar-driven interfacial evaporation technology is regarded as a promising strategy for global freshwater shortage owing to its green and sustainable desalination process. Graphene aerogel (GA) is widely utilized in the design of solar-driven steam generation systems due to its excellent photothermal conversion efficiency and broad spectral absorption. Given the significant impact of hydrophilicity and thermal insulation on the performance of evaporators, nitrogen doping in the graphene structure not only effectively enhances its wettability but also allows for moderate tuning of its thermal conductivity, thereby optimizing the overall performance of the evaporator.
View Article and Find Full Text PDFFreeze-Casting Mold-Based Scalable Synthesis of Directional Graphene Aerogels with Long-Range Pore Alignment for Energy Applications.
Small Methods
January 2025
School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju, 52828, South Korea.
In various applications, the pore structure of a porous medium must be controlled to facilitate heat and mass transfer, which considerably influence the system performance. Freeze-casting is a versatile technique for creating aligned pores; However, because of the complexity of the associated equipment and the energy inefficiency of liquid-nitrogen-based cooling in a room-temperature environment, limits scalability for industrial applications. This study is aimed at establishing a novel freeze-casting strategy with a simple mold design combining heat-conductive and insulating materials for long-range pore alignment via directional ice growth under deep-freezing conditions, rendering it feasible for large-scale production.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!