This study aims to investigate the sewage sludge (SS) drying process by incorporating a by-product formed in the pulp and paper industry (green liquor dregs - GLD) as drying adjuvant. Through an innovative approach, the drying kinetics was modelled, and the final dried product was tested for soil applications. After the characterization phase, small cylinders of SS without and with 0.15 g GLD g SS (SS_GLD) were dried in isothermal conditions at 70, 100, and 130 °C. The experimental data were fitted by Fick's second law and thin-layer models, and good results were achieved in both cases (R > 0.98 and RMSE <0.05). Although only a slight improvement was observed, the best conditions for drying biosolids were found with the addition of GLD at 130 °C, where the drying rate was 30.88 gHO kg SS min. In this condition, a decrease of 8% in the energy required for moisture evaporation was observed. Regarding the phytotoxicity tests with Lepidium sativum L. (garden cress), 60% improvement in EC was noticed for the sample with GLD when compared to the raw SS. The dried product SS_GLD complied with the regulations for soil applications regarding the potentially toxic metals (Cr, Ni, Cu, Pb, Zn, and Cd), and promoted an increase in soil organic matter and pH. However, further and in-depth studies should be conducted to assess the potential of SS_GLD application in agricultural soil.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jenvman.2019.109944 | DOI Listing |
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!