Platinum diselenide (PtSe) is an emerging class of two-dimensional (2D) transition-metal dichalcogenide (TMD) crystals recently gaining substantial interest, owing to its extraordinary properties absent in conventional 2D TMD layers. Most interestingly, it exhibits a thickness-dependent semiconducting-to-metallic transition, i.e., thick 2D PtSe layers, which are intrinsically metallic, become semiconducting with their thickness reduced below a certain point. Realizing both semiconducting and metallic phases within identical 2D PtSe layers in a spatially well-controlled manner offers unprecedented opportunities toward atomically thin tailored electronic junctions, unattainable with conventional materials. In this study, beyond this thickness-dependent intrinsic semiconducting-to-metallic transition of 2D PtSe layers, we demonstrate that controlled plasma irradiation can "externally" achieve such tunable carrier transports. We grew wafer-scale very thin (a few nm) 2D PtSe layers by a chemical vapor deposition (CVD) method and confirmed their intrinsic semiconducting properties. We then irradiated the material with argon (Ar) plasma, which was intended to make it more semiconducting by thickness reduction. Surprisingly, we discovered a reversed transition of semiconducting to metallic, which is opposite to the prediction concerning their intrinsic thickness-dependent carrier transports. Through extensive structural and chemical characterization, we identified that the plasma irradiation introduces a large concentration of near-atomic defects and selenium (Se) vacancies in initially stoichiometric 2D PtSe layers. Furthermore, we performed density functional theory (DFT) calculations and clarified that the band-gap energy of such defective 2D PtSe layers gradually decreases with increasing defect concentration and dimensions, accompanying a large number of midgap energy states. This corroborative experimental and theoretical study decisively verifies the fundamental mechanism for this externally controlled semiconducting-to-metallic transition in large-area CVD-grown 2D PtSe layers, greatly broadening their versatility for futuristic electronics.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.0c00116DOI Listing

Publication Analysis

Top Keywords

ptse layers
32
semiconducting-to-metallic transition
12
ptse
9
layers
9
semiconducting thickness
8
semiconducting metallic
8
plasma irradiation
8
carrier transports
8
semiconducting
5
thickness-independent semiconducting-to-metallic
4

Similar Publications

Unipolar Barrier Photodetectors Based on Van Der Waals Heterostructure with Ultra-High Light On/Off Ratio and Fast Speed.

Adv Sci (Weinh)

January 2025

Information Materials and Intelligent Sensing Laboratory of Anhui Province, Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education, Institutes of Physical Science and Information Technology, Anhui University, 111 Jiu Long Road, Hefei, 230601, China.

Unipolar barrier architecture is designed to enhance the photodetector's sensitivity by inducing highly asymmetrical barriers, a higher barrier for blocking majority carriers to depressing dark current, and a low minority carrier barrier without impeding the photocurrent flow through the channel. Depressed dark current without block photocurrent is highly desired for uncooled Long-wave infrared (LWIR) photodetection, which can enhance the sensitivity of the photodetector. Here, an excellent unipolar barrier photodetector based on multi-layer (ML) graphene (G) is developed, WSe, and PtSe (G-WSe-PtSe) van der Waals (vdW) heterostructure, in which extremely low dark current of 1.

View Article and Find Full Text PDF
Article Synopsis
  • The study focuses on enhancing the performance of PtSe in photodetectors by utilizing hydrophobic bonding for high-quality n-Si/SOI wafer bonding.
  • The resulting p-PtSe/i-Si/n-Si pin photodetector exhibits impressive spectral detection (532 to 2200 nm) and a high rectification ratio (2.1 × 10), indicating effective device functionality.
  • This research represents a novel method for merging wafer bonding techniques with 2D material transfer, paving the way for improved Si-based photodetector designs.
View Article and Find Full Text PDF

Intense second-harmonic generation in two-dimensional PtSe.

Nanophotonics

August 2024

School of Physics, State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, China.

Platinum diselenide (PtSe), classified as a noble metal dichalcogenide, has garnered substantial interest owing to its layer-dependent band structure, remarkable air-stability, and high charge-carrier mobilities. These properties make it highly promising for a wide array of applications in next-generation electronic and optoelectronic devices, as well as sensors. Additionally, two-dimensional (2D) PtSe demonstrates significant potential as a saturable absorber due to its exceptional nonlinear optical response across an ultrabroad spectra range, presenting exciting opportunities in ultrafast and nonlinear photonics.

View Article and Find Full Text PDF

Metal conversion processes have been instrumental in advancing semiconductor technology by facilitating the growth of thin-film semiconductors, including metal oxides and sulfides. These processes, widely used in the industry, enhance the semiconductor manufacturing efficiency and scalability, offering convenience, large-area fabrication suitability, and high throughput. Furthermore, their application to emerging two-dimensional (2D) semiconductors shows promise in addressing spatial control and layer number control challenges.

View Article and Find Full Text PDF

Layer-number and strain effects on the structural and electronic properties of PtSematerial.

J Phys Condens Matter

October 2024

Faculté des Sciences de Bizerte, Laboratoire de Physique des Matériaux: Structure et Propriétés, Université de Carthage, 7021 Jarzouna, Tunisia.

Bandgap engineering of low-dimensional materials forms a robust basis for advancements in optoelectronic technologies. Platinum diselenide (PtSe) material exhibits a transition from semi-metal to semiconductor (SM-SC) when going from bulk to monolayer. In this work, density functional theory (DFT) with various van der Waals (vdW) corrections has been tested to study the effect of the layer-number on the structural and electronic properties of the PtSematerial.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!