It is known that when fires or explosions involve electrical systems, along with PCDDs and PCDFs, polychlorinated biphenylenes (PCBPs) are also produced. These chlorinated tricyclic aromatic pollutants were noticed in fire rubbles and after the World Trade Center destruction. However, the analytical difficulties in developing an efficient method have limited the knowledge of their environmental distribution. In light of the equipotency of 2,3,6,7-TeCBP and 2,3,7,8-TeCDD, PCBPs call for more accurate investigations. In this paper, for the first time, the level and persistence of 2,3,6,7-TeCBP have been investigated in air samples (both indoor and outdoor) after a fire broke out in an industrial building. GC-MS/MS analysis revealed that 2,3,6,7-TeCBP concentrations after the fire (3046 fg/m at the "epicentre") were remarkably higher than that of the 2,3,7,8-TeCDD. Moreover, the monitoring for over two years has demonstrated the persistent nature of this compound. 2,3,6,7-TeCBP was also analyzed in two different ambient air scenario: industrial and periurban areas and in both cases its concentrations were no matter of concern, confirming the correlation of 2,3,6,7-TeCBP with fire episodes. Collectively, 2,3,6,7-TeCBP, because of its toxicity, concentration and persistence, is a crucial compound in the evaluation of the health effects correlated with fires of electrical systems.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jhazmat.2020.122284 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fusion of Visible and Infrared Aerial Images from Uncalibrated Sensors Using Wavelet Decomposition and Deep Learning.
Sensors (Basel)
December 2024
Department of Electrical and Computer Engineering, University of Missouri, Columbia, MO 65211, USA.
Multi-modal systems extract information about the environment using specialized sensors that are optimized based on the wavelength of the phenomenology and material interactions. To maximize the entropy, complementary systems operating in regions of non-overlapping wavelengths are optimal. VIS-IR (Visible-Infrared) systems have been at the forefront of multi-modal fusion research and are used extensively to represent information in all-day all-weather applications.
View Article and Find Full Text PDFComparative Analysis of Low-Cost Portable Spectrophotometers for Colorimetric Accuracy on the RAL Design System Plus Color Calibration Target.
Sensors (Basel)
December 2024
Vetamplify SIA, 57/59-32 Krišjāņa Valdemāra Str., LV-1010 Riga, Latvia.
Novel low-cost portable spectrophotometers could be an alternative to traditional spectrophotometers and calibrated RGB cameras by offering lower prices and convenient measurements but retaining high colorimetric accuracy. This study evaluated the colorimetric accuracy of low-cost, portable spectrophotometers on the established color calibration target-RAL Design System Plus (RAL+). Four spectrophotometers with a listed price between USD 100-1200 (Nix Spectro 2, Spectro 1 Pro, ColorReader, and Pico) and a smartphone RGB camera were tested on a representative subset of 183 RAL+ colors.
View Article and Find Full Text PDFInitial Pose Estimation Method for Robust LiDAR-Inertial Calibration and Mapping.
Sensors (Basel)
December 2024
Department of Intelligent Systems & Robotics, Chungbuk National University, Cheongju 28644, Republic of Korea.
Handheld LiDAR scanners, which typically consist of a LiDAR sensor, Inertial Measurement Unit, and processor, enable data capture while moving, offering flexibility for various applications, including indoor and outdoor 3D mapping in fields such as architecture and civil engineering. Unlike fixed LiDAR systems, handheld devices allow data collection from different angles, but this mobility introduces challenges in data quality, particularly when initial calibration between sensors is not precise. Accurate LiDAR-IMU calibration, essential for mapping accuracy in Simultaneous Localization and Mapping applications, involves precise alignment of the sensors' extrinsic parameters.
View Article and Find Full Text PDFEndpoint Distribution Modeling-Based Capture Algorithm for Interfering Multi-Target.
Sensors (Basel)
December 2024
The State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China.
In physical spaces, pointing interactions cannot rely on cursors, rays, or virtual hands for feedback as in virtual environments; users must rely solely on their perception and experience to capture targets. Currently, research on modeling target distribution for pointing interactions in physical space is relatively sparse. Area division is typically simplistic, and theoretical models are lacking.
View Article and Find Full Text PDFUAV Trajectory Control and Power Optimization for Low-Latency C-V2X Communications in a Federated Learning Environment.
Sensors (Basel)
December 2024
Department of Electrical, Computer and Biomedical Engineering, Toronto Metropolitan University, Toronto, ON M5B2K3, Canada.
Unmanned aerial vehicle (UAV)-enabled vehicular communications in the sixth generation (6G) are characterized by line-of-sight (LoS) and dynamically varying channel conditions. However, the presence of obstacles in the LoS path leads to shadowed fading environments. In UAV-assisted cellular vehicle-to-everything (C-V2X) communication, vehicle and UAV mobility and shadowing adversely impact latency and throughput.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!