Comparison of real wastewater oxidation with Fenton/Fenton-like and persulfate activated by NaOH and Fe(II).

J Environ Manage

Complutense University of Madrid, Faculty of Chemical Sciences, Chemical and Materials Engineering Department, Avda. Complutense s/n, 28040, Madrid, Spain. Electronic address:

Published: February 2020

Treatment of polluted wastewaters from industrial activities has become a source of major concern for the environment. In this work, real wastewater from a physico-chemical (WWFQ) treatment was tested through different oxidation technologies: Fenton and Fenton-like reagent and persulfate activated by NaOH and Fe(II). Oxidation reactions with Fenton's reagent were carried out in a 0.25 L batch reactor at 25 °C by adding either Fe(II) or Fe(III) and HO to an aqueous solution of wastewater, whose pH was previously adjusted to 2 or 3. Iron concentration ranging from 25 to 100 mg/L and peroxide concentration from 2500 to 10000 mg/L were used. The total organic carbon slightly decreased when WWFQ was treated. Moreover, better results were obtained when Fe(II) was used than Fe(III). Both iron concentration and oxidant dosage had a positive influence on the chemical oxygen demand (COD) removal, until an asymptotic value of 30% was obtained. Oxidation of pollutants contained in WWFQ was studied with persulfate (18.4-294 mM) activated with NaOH and Fe(II) (36.8-588 mM). Again, a positive influence of both persulfate and NaOH was observed, although a similar asymptotic COD value was observed. This parallelism between both technologies confirms recalcitrant compounds were obtained.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jenvman.2019.109926DOI Listing

Publication Analysis

Top Keywords

activated naoh
12
naoh feii
12
real wastewater
8
persulfate activated
8
feii feiii
8
iron concentration
8
positive influence
8
feii
5
comparison real
4
oxidation
4

Similar Publications

This study focused on fabricating a cellulose aerogel for oil spill clean-up, using common reed () as the cellulose source. The process involved isolating cellulose from reed via traditional Kraft pulping, considering the effects of key factors on the isolated cellulose content. After a two-stage HP bleaching sequence, the highest cellulose content achieved was 27.

View Article and Find Full Text PDF

Background/purpose: Titanium (Ti) is extensively used in dental and orthopedic implants due to its excellent mechanical properties. However, its smooth and biologically inert surface does not support the ingrowth of new bone, and Ti ions may have adverse biological effects. The purpose is to improve the corrosion resistance of titanium and create a 3D structured coating to enhance osseointegration through a very simple and fast surface treatment.

View Article and Find Full Text PDF

Cyclopamine inhibits corneal neovascularization and fibrosis by alleviating inflammatory macrophage recruitment and endothelial cell activation.

Int Immunopharmacol

January 2025

Department of Ophthalmology, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology, 1095 Jiefang Ave, Wuhan, Hubei 430030 China. Electronic address:

Purpose: To explore the function of cyclopamine in corneal neovascularization and subsequent fibrosis after cornea alkali-burn injury.

Methods: In vivo, mice cornea were injured by NaOH, and then treated with cyclopamine, clodronate liposomes (CLO-LPS), and vehicle of cyclopamine separately by subconjunctival injections. Clinical features were observed and pathological characteristics were examined.

View Article and Find Full Text PDF

As one of the bulk solid wastes in the Yellow River basin in China, fluorite tailings urgently need to be utilized as resources. In this paper, NaOH and NaCO were used for alkali thermal activation of ground fluorite tailings under different temperature conditions, and the reactivity was analyzed by XRD, SEM and compressive strength after hydration, so as to evaluate the feasibility of fluorite tailings as geopolymer precursor. The results show that the fluorite tailings can exhibit certain reactivity under alkaline heat excitation, and significant amorphous glass phase can be detected.

View Article and Find Full Text PDF

The mechanism of alkali to inhibit the organics polymerization in improving the biodegradability of wastewater treated by heat/peroxydisulfate.

Water Res

January 2025

Yellow River Laboratory of Shanxi Province, Shanxi University, Taiyuan, 030006, PR China; The Key Laboratory of Water and Sediment Sciences (Ministry of Education), College of Environmental Sciences and Engineering, Peking University, Beijing, 100871, PR China. Electronic address:

High-temperature wastewaters can themselves activate peroxydisulfate (PDS) to remove aromatic contaminants via polymerization. This, however, may result in an insufficient carbon source for denitrification during biochemical treatment, and the formed polymers, without a proper reuse method, will be costly to handle as hazardous waste. This study demonstrates that the addition of NaOH can suppress the polymerization of aromatic contaminants, which is observed not only in simulated wastewater but also in actual coking wastewater (ACW).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!