Green energy generation from agricultural waste has the potential to minimize dependency on fossil and reduce the resultant environmental impact of this fuel provided anaerobic reactor performance is optimized. Hence, the interactive impact of carbon to nitrogen (C/N) ratio, particle size, and co-digestion of dairy manure (DM) and corn stover (CS) on solid-state anaerobic digester (SSAD) performance was investigated with four treatments (DMCS24S, DMCS24L, DMCS28L, and DMCS32L) in this solid-state study. Novel scanning electron microscope (SEM) image analysis utilized to describe the corn stover using ImageJ indicated that corn stover of particle size 0.18-0.42 mm had lower rough surface texture relative to the 0.42-0.84 mm size. This observation not only influenced the ingestate degradation, the bioconversion rate was negatively affected by 0.18-0.42 mm particle size of corn stover. Notably, increase in C/N ratio led to decrease in total ammonia nitrogen (TAN) and alkalinity concentration (Alk), hence, treatments with the lowest C/N ratio had better reactor performance in terms of suitable process parameters such as Alk, pH, ORP, and TAN. Furthermore, DMCS24L treatment had the highest methane yield (106 mL/g VS) and net methane energy (2.92 MJ/kg). Interestingly, modified Gompertz model gave the best kinetic description of the methane production. This SSAD mesophilic study suggests that corn stover, with particle size of 0.42-0.84 mm, co-digested with dairy manure under a C/N ratio of 24 has the potential to enhance methane yield and optimize reactor performance.: The utilization of agricultural waste for bioenergy generation through solid-state anaerobic digestion could be enhanced through the interactive impact of substrate particle size, carbon-to-nitrogen (C/N) ratio and co-digestion, which has not been previously studied. These ternary factors significantly improved reactor performance and enhanced methane yield when corn stover of 0.42-0.84 mm particle size was co-digested with dairy manure to achieve a C/N ratio of 24.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1080/10962247.2020.1729277 | DOI Listing |
RSC Adv
January 2025
College of Material Science and Art Design, Inner Mongolia Agricultural University Hohhot 010018 China
Corn stover was used as raw material, and purification, oxalic acid treatment, oxidation treatment, and ultrasonic treatment were performed to realize the preparation of corn stover nanocellulose with low energy consumption. The effects of oxalic acid concentration (1 wt%, 2 wt%, 3 wt%, 4 wt%, and 5 wt%) on the purity, morphology, crystalline structure and oxidation efficiency of corn stover cellulose during oxalic acid treatment were investigated. The controllable preparation of corn stover nanocellulose was achieved by changing the parameter conditions of ultrasonic treatment.
View Article and Find Full Text PDFInsects
December 2024
College of Agriculture and Biology, Shandong Province Engineering Research Center of Black Soldier Fly Breeding and Organic Waste Conversion, Liaocheng University, Liaocheng 252000, China.
Black soldier fly larvae (BSFL) convert kitchen waste into high-quality insect feed. However, the optimal amount of auxiliary materials needed to improve the physical and chemical properties of kitchen waste and enhance BSFL bioconversion efficiency remains unresolved. In this study, maize stover and BSFL frass were added to kitchen waste (in groups G2 and G3, respectively) to explore their effects on the growth performance and bioconversion efficiency of BSFL.
View Article and Find Full Text PDFJ Environ Manage
January 2025
College of Environmental Science, Sichuan Agricultural University, Chengdu, Sichuan, 611130, PR China; Sichuan Provincial Engineering Research Center of Agricultural Non-point Source Pollution Control, Sichuan Agricultural University, Chengdu, Sichuan, 611130, PR China.
As a newly developed technology, lignocellulose pretreatment of PHP (phosphoric acid coupled with hydrogen peroxide) can facilitate the enzymatic hydrolysis of pretreated lignocellulose for glucose production. It also has been found that the derived oxidative tail gas from pretreatment can facilely degrade organic pollutant. To balance the pollutant degradation and the glucose yield, the collaborative optimization on pretreatment was investigated.
View Article and Find Full Text PDFHeliyon
January 2025
Mechanics Laboratory, Doctoral Training Unit in Engineering Sciences, Doctoral School of Fundamental and Applied Sciences, University of Douala, P.O. Box: 2701, Douala, Cameroon.
This study focuses on the influence of the partial substitution of cement by Cameroonian corn stover ash (CCSA) on the physical and mechanical behavior of concrete. For this, as materials used, one has first the corn stovers coming from the Bandjoun town in the Koung-khi division, in the West region of Cameroon, which are used to obtain the ashes, while the sand used, came from the Sanaga River in the coastal region of Cameroon. In order to obtain the CCSA, the corn stover is calcined in an oven at 600 °C for 6 h and then characterized; the characterization included infrared spectrometry, X-ray fluorescence spectrometry, fineness of grinding, and absolute density.
View Article and Find Full Text PDFBioresour Technol
January 2025
School of Food Science and Pharmaceutical Engineering, Nanjing Normal University, No. 2 Xuelin Road, Nanjing 210097, China. Electronic address:
Lignocellulosic biomass is the most abundant form of biomass available for fuel production, serving as the fourth leading energy source globally. However, inhibitors generated during pretreatment processes often hinder fermentation performance and conversion efficiency. In this study, we developed an enhanced computer-assisted enzyme cocktail strategy (ComEC 2.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!