This paper presents a model of upwelling radiation above the seawater surface in the event of a threat of dispersed oil. The Monte Carlo method was used to simulate a large number of solar photons in the water, eventually obtaining values of remote sensing reflectance (R). Analyses were performed for the optical properties of seawater characteristic for the Gulf of Gdańsk (southern Baltic Sea). The case of seawater contaminated by dispersed oil at a concentration of 10 ppm was also discussed for different wind speeds. Two types of oils with extremely different optical properties (refraction and absorption coefficients) were taken into account for consideration. The optical properties (absorption and scattering coefficients and angular light scattering distribution) of the oil-in-water dispersion system were determined using the Mie theory. The spectral index for oil detection in seawater for different wind conditions was determined based on the results obtained for reflectance at selected wavelengths in the range 412-676 nm. The determined spectral index for seawater free of oil achieves higher values for seawater contaminated by oil. The analysis of the values of the spectral indices calculated for 28 combinations of wavelengths was used to identify the most universal spectral index of R for 555 nm/440 nm for dispersed oil detection using any optical parameters.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7038757 | PMC |
http://dx.doi.org/10.3390/s20030863 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Department of Chemical Engineering, Myongji University, Yongin 17058, Republic of Korea.
Liquid metals (LMs), i.e., metals and alloys that exist in a liquid state at room temperature, have recently attracted considerable attention owing to their electronic and rheological properties useful in various cutting-edge technologies.
View Article and Find Full Text PDFSci Rep
January 2025
Center for Automation and Robotics, CSIC-Universidad Politécnica de Madrid, Arganda del Rey, Madrid, 28500, Spain.
Aluminium and its alloys, especially Al6061, have gathered significant interest among researchers due to its less density, great durability, and high strength. Due to their lightweight properties, the precise machining of these alloys can become expensive through conventional machining operations for intricate products. Therefore, non-traditional machining such as electric discharge machining (EDM) can potentially be opted for the cutting of Al6061.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Institute of Translational Medicine, School of Medicine, Yangzhou University, Yangzhou 225001, PR China; The Key Laboratory of the Jiangsu Higher Education Institutions for Integrated Traditional Chinese and Western Medicine in Senile Diseases Control (Yangzhou University), Yangzhou 225001, PR China. Electronic address:
In this study, composite films were developed by encapsulating cassia oil (CO) with β-cyclodextrin through a microencapsulation technique and incorporating it into a chitosan (CS), polyvinyl alcohol (PVA) and glycerol matrix. The primary objective of the film was to inhibit bacterial growth on the surface of fresh bananas and extend their shelf life. Characterization methods were employed to evaluate the physical properties and functionality of the composite films.
View Article and Find Full Text PDFJ Environ Manage
January 2025
Xinjiang Key Laboratory of Separation Material and Technology, The Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi, 830011, China; Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China. Electronic address:
Electrocoagulation (EC) has proven its high efficiency and environmental sustainability for treating several types of wastewaters. However, the primary drawbacks of the conventional EC process are the suitable electrode materials and the relatively high cost due to the requirement for electric energy. To overcome these practical challenges, this study investigated effective oil/water separation by a solar-powered electrocoagulation (SPEC) process using a novel highly conductive basalt fabric (BF) cathode.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
School of Chemical Engineering and Technology, Tianjin University, No. 135 Yaguan Road, Jinnan, Tianjin 300354, China.
For the exploration and development of oil and gas reservoirs in shallow, cold regions and deep oceans, oil well cement (OWC) pastes face the challenge of slow cement hydration reactions and the low early-strength development of cement stone at low temperatures, which can cause the risk of fluid channeling and the defective isolation of the sealing section during the cementing construction process. To address the above challenges, a nanoscale hydrated calcium silicate (C-S-H) crystal nucleus, DRA-1L, was synthesized. Its application performance and action mechanism were studied.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!