Osteochondral Allograft Cartilage Transplantation for a Full-Thickness Femoral Condyle Chondral Lesion.

Cartilage lesions of the knee pose a difficult challenge for orthopaedic surgeons. Osteochondral allograft transplantation is an option in the setting of large chondral or osseous defects, or after failure of other treatment options. The use of allograft offers the benefit of utilizing both viable hyaline cartilage and bone. Fresh allografts are usually transplanted into the femoral condyle, although they can also be used in the patella, tibial plateau, or femoral trochlea. Research has shown that patients who undergo this procedure for the treatment of focal and diffuse chondral defects have favorable outcomes and satisfaction scores. The procedure is performed as follows. (1) Preoperative evaluation: patients are evaluated for a cartilage procedure after obtaining history, examination, and imaging (radiographs and magnetic resonance imaging). (2) Approach: a longitudinal parapatellar tendon arthrotomy is performed. (3) Debridement: the lesion is identified, and unstable cartilage is debrided back to stable cartilage. (4) Measure defect: the recipient site depth is measured in 4 positions, as on the face of a clock (12, 3, 6, and 9 o'clock). (5) Template allograft: a sizer is used to template the allograft hemicondyle. (6) Secure and harvest allograft: the allograft is secured in the Osteochondral Allograft Transplantation Surgery (OATS) Workstation (Arthrex) and harvested from cadaver bone. (7) Measure depth: the recipient depth measurements are marked on the allograft. (8) Cut graft: the graft is held with allograft-holding forceps while graft is cut with a saw. (9) Check measurements: allograft measurements are checked to ensure that they match recipient measurements. (10) Round edges: the osseous ends are rounded to assist with insertion of graft. (11) Irrigate: the allograft is irrigated after final cuts. (12) Graft insertion: the graft is inserted after lining up the 12-o'clock position recipient and donor reference marks and is held in place with a press fit. (13) Closure: standard closure in layers is performed.