Purpose: Ray propagation visualization and optical performance analysis of four different intraocular lenses (IOLs).
Methods: In this laboratory study, four IOLs with different optical designs were assessed: a monofocal AcrySof IQ SN60WF [Alcon], a diffractive-refractive bifocal AcrySof IQ Restor SN6AD1 [Alcon], a diffractive trifocal AcrySof IQ PanOptix TFNT00 [Alcon], and a diffractive extended-depth-of-focus (EDOF) Symfony ZXR00 [Johnson&Johnson]. An experimental set-up with a water bath containing 0.01% fluorescein solution and monochromatic green laser light (532 nm) was used to visualize the propagation of light rays. Also, the optical performance of the IOLs was evaluated by measuring the modulation transfer function (MTF) values at a pupil sizes of 3.0 and 4.5 mm on the optical bench OptiSpheric® IOL PRO II (Trioptics GmbH, Germany).
Results: Both the diffractive-refractive bifocal IOL and the EDOF IOL showed two defined foci for distance and near vision. In the diffractive trifocal IOL, three distinct foci for distance, intermediate, and near vision could be visualized.
Conclusions: The ray propagation visualization technique allows a qualitative assessment and comparison of light energy distribution between different IOL models. The measured Through-Focus Response (TFR) quantitatively confirmed the evaluated ray propagation behavior.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6999873 | PMC |
| http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0228342 | PLOS |
Publication Analysis
Top Keywords
Similar Publications
Photobioreactor design utilizing procedural three-dimensional modelling and ray tracing.
J R Soc Interface
January 2025
Faculty of Information Technology, University of Jyväskylä, Jyvaskyla, Finland.
The design of photobioreactors for microalgae cultivation aims to achieve an architecture that allows the most efficient photosynthetic growth. The availability of light at wavelengths that are important for photosynthesis is therefore particularly crucial for reactor design. While testing different reactor types in practice is expensive, simulations could effectively limit the range of material and reactor design options.
View Article and Find Full Text PDFWave-front propagation simulations have been a tool to design and optimize X-ray interferometry devices. The often used plane wave approaches, however, lack the angular resolution to describe effects like system imperfections or inhomogeneous samples in conjunction with the X-ray source size. We developed a framework that allows to simulate optical components as well as samples with any source size in arbitrary configurations by inducing the mentioned effects within the wave propagation instead of adding intermediate models.
View Article and Find Full Text PDFIn this study, we explore the behavior of Bessel beams as they propagate through a misaligned apertured optical system in practice. Based on experimental observations, we propose what we believe to be a novel hypothesis that a Bessel beam propagating through an optical system behaves identically to a paraxial ray under certain conditions. We then derive analytical formulas for the propagation of Bessel beams in Cartesian coordinates and the Huygens-Fresnel principle.
View Article and Find Full Text PDFScanning K-edge subtraction (SKES) imaging with laser-compton x-ray sources.
Med Phys
January 2025
Department of Physics and Astronomy, University of California - Irvine, Irvine, California, USA.
Background: K-edge subtraction (KES) imaging is a dual-energy imaging technique that enhances contrast by subtracting images taken with x-rays that are above and below the K-edge energy of a specified contrast agent. The resulting reconstruction spatially identifies where the contrast agent accumulates, even when obscured by complex and heterogeneous distributions of human tissue. This method is most successful when x-ray sources are quasimonoenergetic and tunable, conditions that have traditionally only been met at synchrotrons.
View Article and Find Full Text PDFOptimization of x-ray dark-field CT for human-scale lung imaging.
Med Phys
January 2025
Department of Engineering Physics, Tsinghua University, Beijing, China.
Background: X-ray grating-based dark-field imaging can sense the small angle scattering caused by object's micro-structures. This technique is sensitive to the porous microstructure of lung alveoli and has the potential to detect lung diseases at an early stage. Up to now, a human-scale dark-field CT (DF-CT) prototype has been built for lung imaging.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!