Inkjet Printing of Curing Agent on Thin PDMS for Local Tailoring of Mechanical Properties.

Macromol Rapid Commun

Department of Electrical and Computer Engineering, Carnegie Mellon University, Pittsburgh, PA, 15213, USA.

Published: March 2020

Rapid prototyping of thin, stretchable substrates with engineered stiffness gradients at desired locations has potential impact in the robustness of skin-wearable electronics, as the gradients can inhibit cracking of interconnect and delamination of embedded electronic chips. Drop-on-demand inkjetting of thinned polydimethylsiloxane (PDMS) curing agent onto a spin-cast 80 µm-thick 20:1 (base: curing agent) PDMS substrate sets the elastic modulus of the subsequently cured film with sub-millimeter accuracy. The inkjet process creates digitally defined stiffness gradient spans as small as 100 µm for single droplets. Varying the drop density results in differences in elastic modulus of up to 80%. In jetting tests of curing agent into pure base PDMS, a continuous droplet spacing of 100 µm results in smooth lines with total widths of 1 mm and a curing agent gradient span of ≈300 µm. Release of freeform mesh elastomer microstructures by removing the uncured base after selective jetting of curing agent into pure base PDMS results in structural line width resolution down to 500 µm.

Download full-text PDF

Source
http://dx.doi.org/10.1002/marc.201900569DOI Listing

Publication Analysis

Top Keywords

curing agent
24
elastic modulus
8
100 µm
8
agent pure
8
pure base
8
base pdms
8
curing
6
agent
6
pdms
5
inkjet printing
4

Similar Publications

Treatment Options for Nosocomial Ventriculitis/Meningitis: A Case Report and Review of the Literature.

Pathogens

December 2024

Intensive Care Unit, Department of Anesthesiology and Critical Care, AHEPA University Hospital, Aristotle University of Thessaloniki, 54636 Thessaloniki, Greece.

Ventriculo-meningitis or nosocomial meningitis/ventriculitis is a severe nosocomial infection that is associated with devastating neurological sequelae. The cerebrospinal fluid isolates associated with the infection can be Gram-positive or -negative, while the spp. is rarely identified.

View Article and Find Full Text PDF

Mechanical Strength and Mechanism Analysis of Silt Soil Cured by Straw Ash-Calcium Carbide Slag.

Materials (Basel)

January 2025

Heilongjiang Provincial Key Laboratory of Road Structure and Green Ecological Technology, Northeast Forestry University, Harbin 150090, China.

Large-scale engineering projects frequently involve pit excavation and wetland landfill operations, resulting in significant silt accumulation that occupies land and adversely affects the environment. Curing technology offers a solution for reusing this waste silt. In this study, straw ash and calcium carbide slag are proposed as effective curing agents for silt soil.

View Article and Find Full Text PDF

Artificial sand cementation improves stability, stiffness, and mechanical strength, making it a critical process in geotechnical applications. This study analyzes the capability of the porosity-water/binding agent index (ηCw/Biv) to predict cemented sands' unconfined compressive strength (qu) and stiffness (Go). Four Colombian sands, i.

View Article and Find Full Text PDF

HBV cccDNA: The Molecular Reservoir of Hepatitis B Persistence and Challenges to Achieve Viral Eradication.

Biomolecules

January 2025

Department of Gastroenterology and Hepatology, Erasmus Medical Center, Wytemaweg 80, 3015CN Rotterdam, The Netherlands.

Hepatitis B virus (HBV) is a major global health issue, with an estimated 254 million people living with chronic HBV infection worldwide as of 2022. Chronic HBV infection is the leading cause of cirrhosis and liver cancer. Current treatment with nucleos(t)ide analogs is effective in the suppression of viral activity but generally requires lifelong treatment.

View Article and Find Full Text PDF

Background: There are few data on the treatment of children and adolescents with multidrug-resistant (MDR) or rifampicin-resistant (RR) tuberculosis, especially with more recently available drugs and regimens. We aimed to describe the clinical and treatment characteristics and their associations with treatment outcomes in this susceptible population.

Methods: We conducted a systematic review and individual participant data meta-analysis.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!