Background: The aim of this study was to investigate whether 33% duty cycle increases end-tidal carbon dioxide (ETCO2) level, a surrogate measurement for cardiac output during cardiopulmonary resuscitation (CPR), compared with 50% duty cycle.
Methods: Six pigs were randomly assigned to the DC33 or DC50 group. After 3 min of induced ventricular fibrillation (VF), CPR was performed for 5 min with 33% duty cycle (DC33 group) or with 50% duty cycle (DC50 group) (phase I). Defibrillation was delivered until return of spontaneous circulation (ROSC) thereafter. After 30 min of stabilization, the animals were re-assigned to the opposite groups. VF was induced again, and CPR was performed (phase II). The primary outcome was ETCO2 during CPR, and the secondary outcomes were coronary perfusion pressure (CPP), systolic arterial pressure (SAP), diastolic arterial pressure (DAP), and right atrial pressure (RAP).
Results: Mean ETCO2 was higher in the DC33 group compared with the DC50 group (22.5 mmHg vs 21.5 mmHg, P = 0.018). In a linear mixed model, 33% duty cycle increased ETCO2 by 1.0 mmHg compared with 50% duty cycle (P < 0.001). ETCO2 increased over time in the DC33 group [0.6 mmHg/min] while ETCO2 decreased in the DC50 group [-0.6 mmHg/min] (P < 0.001). Duty cycle of 33% increased SAP (6.0 mmHg, P < 0.001), DAP (8.9 mmHg, P < 0.001) RAP (2.6 mmHg, P < 0.001) and CPP (4.7 mmHg, P < 0.001) compared with the duty cycle of 50%.
Conclusion: Duty cycle of 33% increased ETCO2, a surrogate measurement for cardiac output during CPR, compared with duty cycle of 50%. Moreover, ETCO2 increased over time during CPR with 33% duty cycle while ETCO2 decreased with 50% duty cycle.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6986725 | PMC |
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0228111 | PLOS |
Environ Sci Technol
January 2025
Saudi Aramco, Dhahran 31311, Saudi Arabia.
Amid ambitious net-zero goals and growing demands for freight logistics, addressing the climate challenges posed by the heavy-duty truck (HDT) sector is an urgent and pivotal task. This study develops an integrated HDT model by incorporating vehicle dynamic simulation and life cycle analysis to quantify energy consumption, greenhouse gas (GHG) emissions, and total cost of ownership associated with three emerging powertrain technologies in various truck use scenarios in China, including battery electric, fuel cell electric, and hydrogen combustion engine trucks. The results reveal varying levels of economic suitability for these powertrain alternatives depending on required driving ranges and duty cycles: the battery electric for regional-haul applications, the hydrogen fuel cell for longer-haul and low-load driving conditions, and the hydrogen combustion engine to meet high power requirements.
View Article and Find Full Text PDFEnergy Fuels
January 2025
Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, Washington 99354, United States.
The Co-Optimization of Fuels and Engines (Co-Optima) is a research and development consortia funded by the U.S. Department of Energy, which has engaged partners from national laboratories, universities, and industry to conduct multidisciplinary research at the intersection of biofuels and combustion sciences.
View Article and Find Full Text PDFAnal Chem
January 2025
Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States.
Charge detection mass spectrometry (CDMS) allows direct mass measurement of heterogeneous samples by simultaneously determining the charge state and the mass-to-charge ratio (/) of individual ions, unlike conventional MS methods that use large ensembles of ions. CDMS typically requires long acquisition times and the collection of thousands of spectra, each containing tens to hundreds of ions, to generate sufficient ion statistics, making it difficult to interface with the time scales of online separation techniques such as ion mobility. Here, we demonstrate the application of Fourier transform multiplexing and drift tube ion mobility joined with Orbitrap-based CDMS for the analysis of multimeric protein complexes.
View Article and Find Full Text PDFSoft Matter
January 2025
Center of Excellence in Energy Conversion (CEEC), Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran.
Recent progress in digital microfluidics has revealed the distinct advantages of liquid marbles, such as minimal surface friction, reduced evaporation rates, and non-wettability compared to uncoated droplets. This study provides a comprehensive examination of an innovative technique for the precise, contamination-free manipulation of non-magnetic water liquid marbles (WLMs) carried by a ferrofluid liquid marble (FLM) under the control of direct current (DC) and pulse-width modulation (PWM) magnetic fields. The concept relies on the phenomenon in which an FLM and WLMs form a shared meniscus when placed together on a water surface, causing the WLMs to closely track the magnetically actuated FLM.
View Article and Find Full Text PDFJ Biophotonics
January 2025
Department of Oral and Maxillofacial Surgery and Dental Research Institute, School of Dentistry, Seoul National University, Seoul, Republic of Korea.
This study examines the effects of pulsed wave photobiomodulation (pwPBM) on the osteogenic differentiation of stem cells from the apical papilla (SCAP). Using 810 nm near-infrared (NIR) light with 300 Hz pulses and a 30% duty cycle, pwPBM was applied at a total energy density of 750 mJ/cm. Osteogenesis was evaluated through both in vitro and in vivo analyses.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!