We report on a comparison between piezoelectric and interferometric readouts of vibrations in quartz tuning forks (QTFs) when acting as sound wave transducers in a quartz-enhanced photoacoustic setup (QEPAS) for trace gas detection. A theoretical model relating the prong vibration amplitude with the QTF prong sizes and electrical resistance is proposed. To compare interferometric and piezoelectric readouts, two QTFs have been selected; a tuning fork with rectangular-shape of the prongs, having a resonance frequency of 3.4 kHz and a quality-factor of 4,000, and a QTF with prong having a T-shape characterized by a resonance frequency of 12.4 kHz with a quality-factor of 15,000. Comparison between the interferometric and piezoelectric readouts were performed by using both QTFs in a QEPAS sensor setup for water vapor detection. We demonstrated that the QTF geometry can be properly designed to enhance the signal from a specific readout mode.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6957788 | PMC |
| http://dx.doi.org/10.1016/j.pacs.2019.100155 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The intrinsic spontaneous and piezoelectric polarizations of GaN lead to the formation of triangular wells and barriers, resulting in the manifestation of chaotic transport models in GaN quantum well intersubband transition (ISBT) infrared detectors and giving rise to various adverse effects. The APSYS software was utilized to construct a novel GaN quantum well ISBT infrared detector in this study. By endeavoring to modify the quantum well structure, our objective was to precisely adjust the energy level of the first excited state (E1) to align with the apex of the triangular barrier.
View Article and Find Full Text PDFEffect of the Current-Collecting Carbon Nanotubes Layer on the Properties of the Lead Zirconate Titanate Film for Vibration Sensors.
Sensors (Basel)
January 2025
Institute of Nanotechnologies, Electronics and Equipment Engineering, Southern Federal University, 347922 Taganrog, Russia.
One of the challenging problems in the research and development of vibration sensors relates to the formation of Ohmic contacts for the removal of an electrical signal. In some cases, it is proposed to use arrays of carbon nanotubes (CNTs), which can serve as highly elastic electrode materials for vibration sensors. The purpose of this work is to study the effect of a current-collecting layer of CNTs grown over silicon on the properties of a lead zirconate titanate (PZT) film, which is frequently employed in mechanical vibration sensors or energy harvesters.
View Article and Find Full Text PDFModeling and Characterization of Multilayer Piezoelectric Stacks via Dynamic Stiffness Method.
Micromachines (Basel)
December 2024
GREMAN UMR 7347 CNRS, Université de Tours, INSA Centre Val de Loire, 3 Rue de la Chocolaterie, 41000 Blois, France.
Multilayer piezoelectric stacks, which are multiple layers of piezoelectric materials placed on top of each other, are widely used to achieve precise linear movement and high-force generation. In this paper, a dynamic stiffness (DS) method for the dynamic vibration analysis of multilayer piezoelectric stacks is presented. First, the general solutions for all physical quantities of the three vibration contributions (i.
View Article and Find Full Text PDFEvaluation of patient comfort and satisfaction after the surgical removal of mandibular impacted molars using a piezo-electric technique: A randomized double-blind clinical trial.
J Oral Biol Craniofac Res
December 2024
Surgery Attachment, College of Dentistry, Qassim University, Qassim, Saudi Arabia.
Introduction: This is a double clinical trial conducted to study the patient satisfaction and comfort during and after surgical removal of impacted mandibular 3rd molar using Piezo electric tips.
Material And Methods: Two groups of 25 each [14 (56 %) males and 11 (44 %) females] and [18 (72 % males and 07 (28 %) females] represented the Rotary and Piezo groups respectively with bilateral impactions. one side of the patient is operated by piezo and the other side by rotary instrument after a gap of 2-3 week between the procedures.
Mathematical Models of Grinding Forces in the Hob Cutter Sharpening Process.
Materials (Basel)
January 2025
Institute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-537 Lodz, Poland.
The article presents the results of research aimed at developing mathematical models for determining the components of grinding force occurring during the sharpening of the rake face of hob cutters. The development of the models was based on the results obtained during experimental tests conducted in the first stage of the research. The studies were carried out using a tool grinder and an aluminum oxide grinding wheel.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!