The stabilizing effect of cellulose crystals in O/W emulsions obtained by ultrasound process.

Food Res Int

School of Food Engineering, University of Campinas, Rua Monteiro Lobato, 80, 13083-862 Campinas, SP, Brazil. Electronic address:

Published: February 2020

The encapsulation of lipophilic bioactive compounds, such as flaxseed oil, is usually done using O/W emulsions as carrier matrix. The aim of this study was to understand the stabilization mechanism of micro-nano cellulose crystals produced from acid hydrolysis in O/W emulsion. Effects of emulsification process conditions using ultrasound on the cellulose particles properties were evaluated varying the proportion of oil-cellulose particles in the emulsion formulation. Cellulose structure did not change using different conditions of emulsification and X-ray diffraction showed major presence of cellulose I. Particle size distribution of cellulose was bimodal and mean particle size reduced after hydrolysis. Emulsions stabilized by cellulose were opaque, homogeneous and showed good kinetic stability. The largest microcrystals were displayed between the oil droplets, preventing the flocculation of the droplets while smaller particles were adsorbed on the oil-water interface. The mechanism of droplets stabilization was not associated to the reduction of interfacial tension. Stabilization was associated to significant effect of electrostatic repulsion and increase in viscosity. Moreover, the flaxseed oil droplets were completely surrounded by cellulose nanocrystals, showing also Pickering-type stabilization. Therefore, emulsions with cellulose crystals were stabilized by different mechanisms and have interesting properties and characteristics for the protection of lipophilic compounds that could be applied in food and cosmetics products.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.foodres.2019.108746DOI Listing

Publication Analysis

Top Keywords

cellulose crystals
12
o/w emulsions
8
flaxseed oil
8
cellulose
8
particle size
8
oil droplets
8
stabilization associated
8
stabilizing cellulose
4
crystals o/w
4
emulsions
4

Similar Publications

Multifunctional quaternary ammonium-modified TEMPO-oxidized cellulose nanofibers and MIL-100 with encapsulated laccase for efficient removal of anionic arund cationic dyes in wastewater.

Int J Biol Macromol

January 2025

Department of Cell and Molecular Biology, Faculty of Life Science and Biotechnology, Shahid Beheshti University, P.O. Box 19839-69411, Tehran, Iran. Electronic address:

The increasing prevalence of micropollutants like cationic and anionic dyes in wastewater creates an influential environmental challenge, mainly due to their toxic effects and persistence. Current methods often lack the efficiency and versatility to cope with a wide variety of contaminants. This study explores the modification of TEMPO-oxidized cellulose nanofibers (TOCNF) using (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHPTAC) to enhance their cationic properties.

View Article and Find Full Text PDF

In this study, we report the modification of a monolithic γ-aluminum oxy-hydroxide (γ-AlOOH) aerogel with cellulose nanofibers (CNFs) using the sol-gel method via supercritical drying. The optimized 2% CNF (w/w) results in a monolithic CNF-γ-AlOOH that is amorphous in nature, along with C-C and C-O-C functional groups. Transmission electron microscopy (TEM) images of the as-synthesized CNF-γ-AlOOH showed CNF embedded in the γ-AlOOH aerogel.

View Article and Find Full Text PDF

Interfacial solar vapor generation (ISVG) accompanied by photocatalytic degradation holds immense potential to mitigate water scarcity and pollution. Distinct from the two detached functional components (photothermal agent and photocatalyst) in a conventional evaporator, in this study, an all-in-one photothermal/catalytic agent, nitrogen-containing honeycomb carbon nanosheets (NHC), was engineered for synergistic high-efficiency steam generation and photocatalysis functions. It was demonstrated that the superoxide radical generated on the surface of NHC conferred its catalytic activity to the photodegradation of organic pollutants under full solar spectrum irradiation.

View Article and Find Full Text PDF

Carboxylated cellulose nanocrystals mediated flower-like zinc oxide for antimicrobial without activation of light.

J Colloid Interface Sci

April 2025

State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China. Electronic address:

Conventional light-driven antimicrobial strategies of zinc oxide (ZnO) are limited by inadequate illumination in dark environments. In this study, carboxylated cellulose nanocrystals (MCNC) mediated flower-like ZnO (C@Z) with self-promoted reactive oxygen species release under dark is fabricated. The adsorption of Zn ions on MCNC prompts the growth of ZnO along the (002) crystal plane, forming a flower-like hybrid with superior dispersibility and oxygen vacancies compared to MCNC-free ZnO, which exposes the (100) plane.

View Article and Find Full Text PDF

In this research, fully biobased composites consisting of poly(butylene 2,5-furandicarboxylate) (PBF) and cellulose nanocrystals (CNC) were successfully prepared through a common solution and casting method. The influence of CNC on the crystallization behavior, mechanical property, and hydrophilicity of PBF was systematically investigated. Under different crystallization processes, the crystallization of PBF was obviously promoted by CNC as a biobased nucleating agent.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!