Clean technology for synchronous sequestration of charged organic micro-pollutant onto microwave-assisted hybrid clay materials.

Environ Sci Pollut Res Int

Department of Chemical Sciences, Environmental and Chemical Processes Research Laboratory, Redeemer's University, P.M.B 230, Ede, Osun State, Nigeria.

Published: March 2020

The Sustainable Development Goal 6 (SDG #6) of the United Nations (UN) is hinged on the provision, availability, and sustainability of water for the global populace by 2030. In a bid to achieve this goal, the quest to seek for ubiquitous and low-cost adsorbents to treat effluents laden with industrial dyes, such as methylene blue (MB), is on the increase in recent years. Acute exposure of humans to (MB) dye causes cyanosis, necrosis, and jaundice and even leads to death. In this research, zinc-modified hybrid clay composite adsorbent (materials from kaolinite and biomass (crushed Carica papaya seeds and/or plantain peel)) was developed via microwave route. This adsorbent was characterized using field emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray (EDX), and high-resolution transmission electron microscopy (HR-TEM). These characterization techniques confirmed the success achieved in doping hybrid clay with Zn. These adsorbents were used to sequester cationic dye (MB) from aqueous solutions and textile effluent under various experimental conditions. The adsorption and desorption data obtained were analyzed using various kinetic models, which are two-step kinetics, pseudo-first order, pseudo-second order, fractal kinetics, first-order desorption, second-order desorption, and modified statistical rate theory (MSRT) desorption models. Results showed that the adsorption of the dye occurred via several chemical interactions, while the latter models (for desorption) indicated that desorption occurred in two different desorption sites on the adsorbent surfaces, which showed that the adsorption of MB dye onto the adsorbents was stable without the emergence of any secondary pollution. Adsorption of MB was achieved within 15 min for aqueous solutions and 900 min for textile effluent, which is an improvement on previous results from other studies. The three adsorption-desorption cycles for MB uptake by the adsorbents showed that it is pragmatically applicable to treat textile effluents. Hence, low-cost composite adsorbents have a potential for the effective remediation of MB dye from textile effluents as this study confirmed.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s11356-019-07563-zDOI Listing

Publication Analysis

Top Keywords

hybrid clay
12
electron microscopy
8
aqueous solutions
8
textile effluent
8
textile effluents
8
desorption
7
adsorbents
5
clean technology
4
technology synchronous
4
synchronous sequestration
4

Similar Publications

Synthesis and Characterization of a Nanoclay Reinforced Gelatin-Based Hybrid Hydrogel.

J Biomed Mater Res A

January 2025

Department of Mechanical and Manufacturing Engineering, University of Calgary, Calgary, Alberta, Canada.

Bentonite clay nanoparticles assume a pivotal role in 3D bioprinting and tissue engineering by augmenting the mechanical rigidity and biological efficacy of hydrogels. In this investigation, Span80 was employed as a surfactant to facilitate the synthesis of uniformly sized bentonite nanoparticles measuring approximately 700 nm in diameter. The resultant hybrid hydrogel displaced a marked increase in compressive modulus, achieving a peak value of 17.

View Article and Find Full Text PDF

Eco-Friendly Fire-Retardant Coating on Cotton Using Layer by Layer Deposition Technique.

Molecules

December 2024

College of Mechatronic Engineering, Changwon National University, Changwon 51140, Gyeongsangnam-do, Republic of Korea.

Fire hazards are an increasing concern in several high-tech industries of public importance, particularly where textile fabrics are used in abundance. In this study, a novel layer by layer deposition method was utilized to develop a fire-retardant coating on cotton fabric. The method involves a hybrid cationic solution consisting of chitosan and branched polyethyleneimine, while bentonite clay was used as the anionic species.

View Article and Find Full Text PDF

Multifunctional nanocellulose hybrid films: From packaging to photovoltaics.

Int J Biol Macromol

December 2024

Physical Chemistry and Soft Matter, Wageningen University and Research, 6708 WE Wageningen, Netherlands. Electronic address:

Article Synopsis
  • The study focused on creating eco-friendly multifunctional nanocellulose hybrid films for applications in packaging and photovoltaics, using varying ratios of cellulose nanocrystals and carboxymethylated cellulose nanofibrils.
  • Hybrid films incorporating montmorillonite clay improved structural integrity, but increased brittleness was noted with higher amounts of CNF and MTM.
  • The films exhibited good light transmittance and color stability under sunlight, highlighting their potential for diverse applications, particularly in optoelectronics and sustainable packaging.
View Article and Find Full Text PDF

The incorporation of photoactive organic dyes into layered inorganic materials enhances their optical and chemical properties, making them ideal for sensing applications. In this study, Bisindolyl methane (BIM)-based neutral probes were integrated with bentonite clay to explore their sensing capabilities. Probe 1 (unoxidized BIM) and Probe 2 (oxidized BIM) generally exhibited quenched luminescence in solution due to intramolecular rotations.

View Article and Find Full Text PDF

This paper contributes to the expanding knowledge base on nanomaterial-enhanced cementitious composites, offering valuable insights for developing high-performance, sustainable concrete solutions. The study assessed the effects of three different types of nanomaterials-nano clay (NC), nano silica (NS), and nano cellulose (NCel)-on the compressive strength of high-early-strength concrete (HESC) through both experimental studies and a 2 factorial design. Incorporating nanomaterials into the HESC matrix led to a decrease in workability, with NCel demonstrating the least impact on this property across all studied replacement percentages.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!