A facile in situ polymerization was developed for grafting renewable cardanol onto the carbon fiber (CF) surfaces to strengthen the fiber-matrix interface. CFs were chemically modified with hydroxyl groups by using an aryl diazonium reaction, and then copolymerized in situ with hexachlorocyclotriphosphazene (HCCP) and cardanol to build cardanol-modified fibers (CF-cardanol). The cardanol molecules were successfully introduced, as confirmed using Raman spectra and X-ray photoelectron spectroscopy (XPS); the cardanol molecules were found to increase the surface roughness, energy, interfacial wettability, and activity with the matrix resin. As a result, the interlaminar shear strength (ILSS) of CF-cardanol composites increased from 48.2 to 68.13 MPa. In addition, the anti-hydrothermal ageing properties of the modified composites were significantly increased. The reinforcing mechanisms of the fiber-matrix interface were also studied.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7023525 | PMC |
| http://dx.doi.org/10.3390/polym12010045 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Development of Novel Cardanol-Derived Reactive Dispersing Agents for Bio-Based Anionic-Nonionic Waterborne Polyurethane.
Polymers (Basel)
October 2024
College of Chemistry and Material Science, Fujian Normal University, Fuzhou 350117, China.
This study successfully developed a bio-based, photocurable, anionic-nonionic dual-functional chain extender, and sulfonated cardanol-based polyethylene glycol (SCP), derived from renewable resources-cardanol and polyethylene glycol-for application in waterborne polyurethane dispersions (WPUDs). Utilizing SCP as a chain extender, WPUDs were prepared through a typical acetone process with poly(butylene adipate) (PBA), isophorone diisocyanate (IPDI), and ethylene diamine (EDA) at a constant NCO/OH ratio of 1:1. This research focused on the effects of polyethylene glycol molecular weight and SCP dosage on the particle size, stability, and film-forming properties of the WPUD.
View Article and Find Full Text PDFFabrication and Characterization of Biopolymers Using Polyvinyl Alcohol and Cardanol-Based Polyols.
Molecules
October 2024
Department of Chemical Engineering, Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Republic of Korea.
Biodegradable polymers are getting attention as renewable alternatives to petroleum-based plastics due to their environmental benefits. However, improving their physical properties remains challenging. In this work, biodegradable biopolymers (PVA-PCD) were fabricated by chemically crosslinking petroleum-based polyvinyl alcohol (PVA) with biomass-derived cardanol-based polyols (PCD).
View Article and Find Full Text PDFA Biobased Vitrimer: Self-Healing, Shape Memory, and Recyclability Induced by Dynamic Covalent Bond Exchange.
ACS Omega
August 2024
Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry (CAF), Nanjing 210042, China.
Plant oil-based vitrimer is an innovative and sustainable polymer with wide-ranging potential applications in the field of advanced materials. However, its restricted application is caused by the poor mechanical properties and the need for catalysts during preparation. Using renewable cardanol as the raw material, epoxy cardanol glycidyl ether (ECGE) with an end epoxide group was obtained by the clicking reaction and epoxidation reaction.
View Article and Find Full Text PDFCatalyst-Free Cardanol-Based Epoxy Vitrimers for Self-Healing, Shape Memory, and Recyclable Materials.
Polymers (Basel)
January 2024
Key Laboratory of Biomass Energy and Material, Jiangsu Province, Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing 210042, China.
Bio-based vitrimers present a promising solution to the issues associated with non-renewable and non-recyclable attributes of traditional thermosetting resins, showcasing extensive potential for diverse applications. However, their broader adoption has been hindered by the requirement for catalyst inclusion during the synthesis process. In this study, a cardanol-based curing agent with poly-hydroxy and tertiary amine structures was prepared by a clean synthetic method under the theory of click chemistry.
View Article and Find Full Text PDFOn a Biobased Epoxy Vitrimer from a Cardanol Derivative Prepared by a Simple Thiol-Epoxy "Click" Reaction.
ACS Omega
January 2024
Dipartimento di Chimica e Chimica Industriale, Università degli studi di Genova, Via Dodecaneso 31, 16146 Genoa, Italy.
The development of this work lies in the relevant interest in epoxy resins, which, despite their wide use, do not meet the requirements for sustainable materials. Therefore, the proposed approach considers the need to develop environmentally friendly systems, in terms of both the starting material and the synthetic method applied as well as in terms of end-of-life. The above issues were taken into account by (i) using a monomer from renewable sources, (ii) promoting the formation of dynamic covalent bonds, allowing for material reprocessing, and (iii) evaluating the degradability of the material.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!