Optical spectroscopy as a diagnostic tool for metal ion beam production with an ECRIS.

At GSI, the CAPRICE ECRIS is used to provide heavy ion beams to the UNILAC (Universal Linear Accelerator) accelerator. In order to satisfy the demand of metal ion beams, a resistively heated oven is routinely used. This evaporation technique allows the ion beam production from natural and enriched solid elements or compounds with high efficiency and low material consumption. Often it is required to provide high charge state ion beams from rare or extremely rare isotopes as Ca, e.g., for the investigation of super heavy elements. In order to maintain the ion beam stable for the entire scheduled beam time, the plasma inside the ion source must remain as stable as possible. The tuning of ion source parameters and oven power affecting the oven temperature and, in turn, the evaporation rate is necessary. A strong relationship between the microwave power and the oven heating was observed, thus affecting the power control, the plasma stability, and the material consumption. Hence, it was investigated how an optical spectrometer can be used as a predictive diagnostic tool to detect ion source instabilities. Furthermore, the effect of parasitic oven heating by coupling of microwaves was investigated. Optical emission spectroscopy was performed by analyzing the light from the plasma and from the oven through the extraction aperture. The measurements enabled us to distinguish between resistive heating and microwave heating. The results of this investigation are presented.