Iron powders and Fe/graphene oxide and Fe/boron nitride composites were synthesized by means of a polyol synthesis method. The effect of NaOH/Fe and ascorbic acid/Fe ratios on the characteristics of synthesized products were evaluated. The samples were characterized by X-ray diffraction, scanning and transmission electron microscopy, low-temperature nitrogen adsorption and Raman-spectroscopy. Ascorbic acid-assisted polyol synthesis resulted in the 10-fold decrease of the iron particles' size and almost 2-fold increase of lead removal efficiency. The deposition of iron on the surface of graphene oxide lead to the formation of small 20-30 nm sized particles as well as bigger 200-300 nm sized particles, while the reduction in presence of boron nitride resulted in the 100-200 nm sized particles. The difference is attributed to the surface state of graphene oxide and boron nitride. Adsorption properties of the obtained materials were studied in the process of Pb ion removal from wastewater.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7023246 | PMC |
http://dx.doi.org/10.3390/nano10010037 | DOI Listing |
Ann Agric Environ Med
September 2024
Higher School of Health Promotion, Kraków, Poland.
Front Aging
December 2024
Diabetes Research Program, Holman Division of Endocrinology, Diabetes and Metabolism, Department of Medicine, New York University School of Medicine, New York, NY, United States.
Human skin plays an important role protecting the body from both extrinsic and intrinsic factors. Skin aging at cellular level, which is a consequence of accumulation of irreparable senescent keratinocytes is associated with chronological aging. However, cell senescence may occur independent of chronological aging and it may be accelerated by various pathological conditions.
View Article and Find Full Text PDFInt J Biol Macromol
December 2024
Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center, Jieyang 515200, PR China; Guangdong Provincial Key Laboratory of Plant Resources Biorefinery, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Waihuan Xi Road 100, Guangzhou, Guangdong 510006, PR China.
Lignin, a renewable and biodegradable polymer, offers a promising alternative to petroleum-based polyols for polyurethane elastomer synthesis. However, its complex structure poses challenges, such as poor dispersibility and reactivity. This study introduces a novel one-step and solvent-free method for synthesizing lignin-containing polyurethane elastomers (SF-LPUes-ONE) with a high lignin substitution rate of at least 30 wt%.
View Article and Find Full Text PDFJ Phys Chem C Nanomater Interfaces
December 2024
The Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, Georgia 30332, United States.
We report a scalable method based on continuous-flow reactors for conformally coating the surfaces of facet-controlled Pd nanocrystals with uniform, ultrathin shells made of Pt. The key to the success of such an approach is the identification of a proper polyol to generate the Pt atoms at a relatively slow rate to ensure adequate surface diffusion and thus the formation of uniform shells in a layer-by-layer fashion. We first demonstrate the concept using the production of Pd@Pt (n = 2-5) core-shell icosahedral nanocrystals and then have the strategy successfully extended to the syntheses of Pd@Pt cubic and octahedral nanocrystals.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
December 2024
Department of Chemical Engineering, The Pennsylvania State University, University Park, PA, USA, 16802.
Ethylene glycol or one of its oxidation products are believed to serve as reducing agents in the shape-controlled synthesis of Ag nanocubes (NCs) by the polyol process. The identity of end-groups of polyvinylpyrrolidone (PVP) impacts shape control with alcohol and aldehyde moieties serving as a primary Ag reducing agent. We explored the role of PVP end-groups in the polyol process by measuring the dependence of particle number density of Ag NCs produced on the initial concentration(s) of Ag and PVP using small angle x-ray scattering and statistically large particle size distributions analyzed by scanning electron microscopy.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!