A review of defect structure and chemistry in ceria and its solid solutions.

Chem Soc Rev

Electrochemical Materials, Department of Materials, ETH Zurich, Switzerland and Electrochemical Materials, Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA. and Electrochemical Materials, Department of Electrical Engineering & Computer Science, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.

Published: January 2020

Ceria and its solid solutions play a vital role in several industrial processes and devices. These include solar energy-to-fuel conversion, solid oxide fuel and electrolyzer cells, memristors, chemical looping combustion, automotive 3-way catalysts, catalytic surface coatings, supercapacitors and recently, electrostrictive devices. An attractive feature of ceria is the possibility of tuning defect-chemistry to increase the effectiveness of the materials in application areas. Years of study have revealed many features of the long-range, macroscopic characteristics of ceria and its derivatives. In this review we focus on an area of ceria defect chemistry which has received comparatively little attention - defect-induced local distortions and short-range associates. These features are non-periodic in nature and hence not readily detected by conventional X-ray powder diffraction. We compile the relevant literature data obtained by thermodynamic analysis, Raman spectroscopy, and X-ray absorption fine structure (XAFS) spectroscopy. Each of these techniques provides insight into material behavior without reliance on long-range periodic symmetry. From thermodynamic analyses, association of defects is inferred. From XAFS, an element-specific probe, local structure around selected atomic species is obtained, whereas from Raman spectroscopy, local symmetry breaking and vibrational changes in bonding patterns is detected. We note that, for undoped ceria and its solid solutions, the relationship between short range order and cation-oxygen-vacancy coordination remains a subject of active debate. Beyond collating the sometimes contradictory data in the literature, we strengthen this review by reporting new spectroscopy results and analysis. We contribute to this debate by introducing additional data and analysis, with the expectation that increasing our fundamental understanding of this relationship will lead to an ability to predict and tailor the defect-chemistry of ceria-based materials for practical applications.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c9cs00588aDOI Listing

Publication Analysis

Top Keywords

ceria solid
12
solid solutions
12
raman spectroscopy
8
ceria
6
review defect
4
defect structure
4
structure chemistry
4
chemistry ceria
4
solid
4
solutions ceria
4

Similar Publications

Forming defect sites on catalyst supports and immobilizing precious metal atoms at these sites offers an efficient approach for preparing single-atom catalysts. In this study, we employed an Fe-Ce oxide solid solution (FC), which has surface oxygen that reduces more readily than that of ceria, to anchor Rh single atoms (Rh). When utilized in the selective catalytic reduction of NO with CO (CO-SCR), Rh/FC reduced at 500 °C-characterized by less oxidic Rh state induced by an oxygen-deficient coordination-exhibited superior activity and durability compared to Rh/ceria and Rh/FC reduced at 300 °C.

View Article and Find Full Text PDF

The development and characterization of synthesis techniques for oxide materials based on ceria is a subject of extensive study with the objective of their wide-ranging applications in pursuit of sustainable development. The present study demonstrates the feasibility of controlled synthesis of CeMO (M = Fe, Ni, Co, Mn, Cu, Ag, Sm, Cs, x = 0.0-0.

View Article and Find Full Text PDF

Dynamic phase transitions dictate the size effect and activity of supported gold catalysts.

Sci Adv

December 2024

Center for Rare Earth and Inorganic Functional Materials, School of Materials Science and Engineering & National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.

The landmark discovery of gold catalysts has aroused substantial interest in heterogeneous catalysis, yet the catalytic mechanism remains elusive. For carbon monoxide oxidation on gold nanoparticles (NPs) supported on ceria surfaces, it is widely believed that carbon monoxide adsorbs on the gold particles, while the reaction occurs at the gold/ceria interface. Here, we have investigated the dynamic changes of supported gold NPs with various sizes in a carbon monoxide oxidation atmosphere using deep potential molecular dynamics simulations.

View Article and Find Full Text PDF

Ceria-Catalysed Production of Dimethyl Carbonate from Methanol and CO: Effect of Using a Dehydrating Agent Combined with a Solid Cocatalyst.

Molecules

November 2024

Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181-UCCS-Unité de Catalyse et Chimie du Solide, F-59000 Lille, France.

The direct synthesis of dimethyl carbonate (DMC) from CO and methanol over ceria-based catalysts, in the presence of a dehydrating agent shifting the thermodynamical equilibrium of the reaction, has received significant interest recently. In this work, several dehydrating agents, such as molecular sieves, 2,2-dimethoxypropane (DMP), dimethoxymethane (DMM) and 1,1,1-trimethoxymethane (TMM), are combined with commercial ceria to compare their influence on the DMC yield obtained under the same set of operating conditions. TMM is found to be the most efficient; however, its conversion is not complete even after 48 h of reaction.

View Article and Find Full Text PDF

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O Nanoparticles.

ACS Appl Mater Interfaces

January 2025

Department of Materials Science & Engineering, The Grainger College of Engineering, University of Illinois Urbana-Champaign, 1304 W. Green Street, Urbana, Illinois 61801, United States.

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!