Background: It remains unclear whether the curative result of paroxysmal atrial fibrillation (PAF) is a result of pulmonary vein (PV) isolation, PV antrum modification (PVAM), or both. We hypothesized that sufficient antrum modification (PVAM) is as important as PV isolation (PVI) for atrial fibrillation (AF) control and that PVAM can be evaluated by quantified lesion deployment using a force-sensing catheter.

Methods And Results: Patients of symptomatic PAF were randomly assigned 2:1 into a PVAM group or a circumferential PV isolation (CPVI) group. In the PVAM group, circumferential quantitative ablation evaluated by automatical VisiTag module was performed. In the CPVI group, conventional circumferential ablation was performed to achieve the end point of all-PV isolation. In total, 180 patients with PAF were enrolled and randomly assigned to either the PVAM group (n = 120) or the CPVI group (n = 60). A total of 179 patients successfully underwent ablation. In the PVAM group, 68 patients achieved all PVI (PVAM-PVI), while 51 did not (PVAM-non-PVI). At 18 months, there was no significant difference in the maintenance of sinus rhythm between the PVAM and CPVI groups (84.9 vs 79.7%, P = .382). The PVAM-PVI subgroup demonstrated a higher arrhythmia-free survival compared with the PVAM-non-PVI subgroup (92.6 vs 74.5%, P = .006) and the CPVI group (92.6 vs 79.7%, P = .036).

Conclusions: The trial shows that sufficient force-sensing guided PVAM can result in satisfying outcomes in PAF patients. Notably, sufficient PVAM with all-PV isolated will further increase the success rate.

Download full-text PDF

Source
http://dx.doi.org/10.1111/pace.13863DOI Listing

Publication Analysis

Top Keywords

pvam group
16
cpvi group
16
atrial fibrillation
12
pvam
10
pulmonary vein
8
paroxysmal atrial
8
antrum modification
8
modification pvam
8
randomly assigned
8
assigned pvam
8

Similar Publications

Facilitated transport membranes (FTMs) with an ultraselective layer prepared from amine-rich polyvinylamine (PVAm)/2-(1-piperazinyl)ethylamine salt of sarcosine (PZEA-Sar) (denoted by PM) and an amorphous dendritic cross-linked network of PVAm-functionalized poly(ethylene glycol)diglycidyl ether (PEGDGE) (named PP) were designed for CO separations. The developed membranes expedited CO transport over N through the synergistic effect from the induced CO-philic ethylene oxide groups and highly hydrophilic and polar hydroxyl groups together with the low-crystallinity PP networks, which offer a high diffusion rate for CO-amine complexes through the membrane and stabilize small molecular mobile carriers via hydrogen bonding. The best (PM/PP-10)/polysulfone (PSf) composite membranes achieved a superior CO/N selectivity of 230 (4.

View Article and Find Full Text PDF

Moisture-Triggered 71000-Fold Stiffness Change Materials Via Crystallization and Hydrogen Bonding.

ACS Appl Mater Interfaces

December 2024

College of Textile Science and Engineering, Jiangnan University, 1800 Lihu Avenue, Wuxi 214222, China.

Stiffness change materials have been widely used in soft robots, intelligent adhesives and biomedical minimally invasive devices which can respond to specific stimuli. Compared with stimuli such as light, electricity, magnetism, temperature, and pressure, moisture is a non-toxic, readily available, and inexhaustible triggered source in the atmosphere. However, it is challenging to achieve a stiffness variable material with a large stiffness change using moisture.

View Article and Find Full Text PDF

This study explores the synthesis and modification of poly(N-vinylformamide-co-N-hydroxyethyl acrylamide) (poly(NVF-co-HEA)) hydrogels for cosmetic applications. Poly(NVF-co-HEA) hydrogels were produced followed by an acid hydrolysis reaction to produce poly(NVF-co-VAm-co-HEA) hydrogels, introducing poly(vinyl amine) (PVAm) into the structure. This modification considerably alters the hydrogels' properties, yielding materials with over 96% water content, predominantly in the form of non-freezing or free water, which is beneficial in the uptake and release of hydrophilic species.

View Article and Find Full Text PDF

Nonleaching Biocidal N-Halamine-Functionalized Polyamine-, Guanidine-, and Hydantoin-Based Coatings.

Ind Eng Chem Res

April 2024

Department of Pharmacology, Pharmacy and Pharmaceutical Technology, I+D Farma Group (GI-1645), Facultad de Farmacia, Instituto de Materiales (iMATUS), and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, 15782 Santiago de Compostela, Spain.

Fibrous materials with inherent antimicrobial properties can help in real-time deactivation of microorganisms, enabling multiple uses while reducing secondary infections. Coatings with antiviral polymers enhance the surface functionality for existing and potential future pandemics. Herein, we demonstrated a straightforward route toward biocidal surface creation using polymers with nucleophilic biguanide, guanidine, and hydantoin groups that are covalently attached onto a solid support.

View Article and Find Full Text PDF

Recent Advances in Membranes Used for Nanofiltration to Remove Heavy Metals from Wastewater: A Review.

Membranes (Basel)

July 2023

Advanced Polymer Materials Group, Faculty of Chemical Engineering and Biotechnologies, University Politehnica of Bucharest, 132 Calea Grivitei, 010737 Bucharest, Romania.

The presence of heavy metal ions in polluted wastewater represents a serious threat to human health, making proper disposal extremely important. The utilization of nanofiltration (NF) membranes has emerged as one of the most effective methods of heavy metal ion removal from wastewater due to their efficient operation, adaptable design, and affordability. NF membranes created from advanced materials are becoming increasingly popular due to their ability to depollute wastewater in a variety of circumstances.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!