Enrichment strategies are designed for the pretreatment of low-abundance glycans and glycopeptides prior to mass spectrometric (MS) analysis. Here, a tip-based strategy is being reported for the enrichment of glycopeptides and glycans using a piperazine modified polymeric monolithic tip. The tip is fabricated using the free radical polymerization. Fast separation (2 min) is achieved under optimized conditions with 20 cycles per step of loading, incubation, washing, and elution followed by MALDI-MS analysis. A total of 25, 22, and 34 glycopeptides covering all glycosylation sites are enriched by the modified tips from tryptic digests of horse radish peroxidase, chicken avidin, and human immunoglobulin G, respectively. Piperazine exhibits high selectivity 1:400 horse radish peroxidase/bovine serum albumin, sensitivity to 100 attomoles, recovery 89.51%, and batch to batch reproducibility (RSD > 1) in glycopeptides enrichment. Piperazine tips also enrich glycans from ovalbumin and human immunoglobulin G. High selectivity (1:1200, ovalbumin/BSA) and detection limit of 100 attomole is attained for glycans and furthermore 58 glycans are enriched from human serum. Thus, piperazine tips can be used as an enrichment tool for swift, cost-effective routine analysis of biological samples for separation of glycopeptides and glycans.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.analchem.9b02068 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Nano-LC with New Hydrophobic Monolith Based on 9-Antracenylmethyl Methacrylate for Biomolecule Separation.
Int J Mol Sci
December 2024
Department of Chemistry, College of Science, Taif University, Taif P.O. Box 11099, Saudi Arabia.
In this study, new monolithic poly(9-anthracenylmethyl methacrylate-co-trimethylolpropane trimethacrylate (TRIM) columns, referred as ANM monoliths were prepared, for the first time, and were used for the separation media for biomolecules and proteomics analysis by nano-liquid chromatography (nano-LC). Monolithic columns were prepared by in situ polymerization of 9-anthracenylmethyl methacrylate (ANM) and trimethylolpropane trimethacrylate (TRIM) in a fused silica capillary column of 100 µm ID. Polymerization solution was optimized in relation to monomer and porogenic solvent.
View Article and Find Full Text PDFGold nanoparticles supported onto zwitterionic polymer capillary monoliths meant for efficient enrichment of microcystins in water.
Talanta
December 2024
Key Laboratory for Analytical Science of Food Safety and Biology, College of Chemistry, Fuzhou University, Fuzhou, 350116, China; International (HongKong Macao and Taiwan) Joint Laboratory on food safety and environmental analysis, Fuzhou, 350116, Fuzhou University, China; Engineering Technology Research Center on Reagent and Instrument for Rapid Detection of Product Quality and Food Safety, Fuzhou, 350116, China. Electronic address:
The release of microcystin (MCs) in aquatic ecosystems poses a substantial risk to the safety of irrigation and drinking water. In view of the challenges associated with monitoring MCs in water bodies, given their low concentration levels (μg/L to ng/L) and the presence of diverse matrix interferences, there is an urgent need to develop an efficient, cost-effective and selective enrichment technique for MCs prior to its quantification. In this work, a gold nanoparticles (AuNPs)-functionalized zwitterionic polymer monolith was described and further applied for the affinity enrichment of MCs.
View Article and Find Full Text PDFImpact of compaction process on the carbon epoxy composite under varied environmental conditions.
Sci Rep
December 2024
Mechanical and Aerospace Engineering Department, United Arab Emirates University, 15551, Al Ain, United Arab Emirates.
Fibre-reinforced polymeric composites utilized in aerospace settings, experience varying environmental conditions throughout their operational lifespan. The major factors that can have adverse effects on their long-term performance are water and temperature. The present study investigates how the determinants such as water and temperature impact the structural integrity of plain weave woven carbon/epoxy laminated composites and further categorizing them into compacted and non-compacted groups.
View Article and Find Full Text PDFComparative analysis of the fit quality of monolithic zirconia veneers produced through traditional and digital workflows using silicone replica technique: an in vitro study.
BMC Oral Health
December 2024
Faculty of Odonto-Stomatology, University of Health Sciences, Vietnam National University Ho Chi Minh City, Ho Chi Minh City, Vietnam.
Background: The success of a restoration largely depends on the quality of its fit. This study aimed to investigate the fit quality of monolithic zirconia veneers (MZVs) produced through traditional and digital workflows.
Methods: A typodont maxillary right central incisor was prepared.
Ultra-Stiff yet Super-Elastic Graphene Aerogels by Topological Cellular Hierarchy.
Adv Mater
December 2024
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, International Research Center for X Polymers, Department of Polymer Science and Engineering, Zhejiang University, 38 Zheda Road, Hangzhou, 310027, China.
Lightweight cellular materials with high stiffness and excellent recoverability are critically important in structural engineering applications, but the intrinsic conflict between these two properties presents a significant challenge. Here, a topological cellular hierarchy is presented, designed to fabricate ultra-stiff (>10 MPa modulus) yet super-elastic (>90% recoverable strain) graphene aerogels. This topological cellular hierarchy, composed of massive corrugated pores and nanowalls, is designed to carry high loads through predominantly reversible buckling within the honeycomb framework.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!