AI Article Synopsis

  • This study investigates the use of circular economy principles to transform urban organic waste into valuable products and energy while reducing environmental impact.
  • An urban biorefinery has been developed in Treviso, Italy, employing a pilot-scale technology chain that produces bioplastics (PHAs) and biogas through a series of fermentation and separation processes.
  • Various operational parameters were optimized to maximize the production of volatile fatty acids and biopolymers, resulting in significant yields and emphasizing the potential of waste-to-energy solutions.

Article Abstract

This study focuses on the application of the concept of circular economy, with the creation of added-value marketable products and energy from organic waste while minimizing environmental impacts. Within this purpose, an urban biorefinery technology chain has been developed at pilot scale in the territorial context of the Treviso municipality (northeast Italy) for the production of biopolymers (polyhydroxyalkanoates, PHAs) and biogas from waste of urban origin. The piloting system (100-380 L) comprised the following units: a) acidogenic fermentation of the organic fraction of municipal solid waste (OFMSW) and biological sludge; b) two solid/liquid separation steps consisting of a coaxial centrifuge and a tubular membrane (0.2 μm porosity); c) a Sequencing Batch Reactor (SBR) for aerobic PHA-storing biomass production; d) aerobic fed-batch PHA accumulation reactor and e) Anaerobic co-digestion (ACoD). The thermal pre-treatment (72 °C, 48 h) of the feedstock enhanced the solubilization of the organic matter, which was converted into volatile fatty acids (VFAs) in batch mode under mesophilic fermentation conditions (37 °C). The VFA content increased up to 30 ± 3 g COD/L (overall yield 0.65 ± 0.04 g COD/g VS), with high COD/COD (0.86 ± 0.05). The high COD/COD ratio enhanced the PHA-storing biomass selection in the SBR by limiting the growth of the non-storing microbial population. Under fully aerobic feast-famine regime, the selection reactor was continuously operated for 6 months at an average organic loading rate (OLR) of 4.4 ± 0.6 g COD/L d and hydraulic retention time (HRT) of 1 day (equal to SRT). The ACoD process (HRT 15 days, OLR 3.0-3.5 kg VS/m d) allowed to recover the residual solid-rich overflows generated by the two solid/liquid separation units with the production of biogas (SGP 0.44-0.51 m/kg VS) and digestate. An overall yield of 7.6% wt PHA/VS has been estimated from the mass balance. In addition, a preliminary insight into potential social acceptance and barriers regarding organic waste-derived products was obtained.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.watres.2019.115371DOI Listing

Publication Analysis

Top Keywords

urban biorefinery
8
biological sludge
8
solid/liquid separation
8
pha-storing biomass
8
high cod/cod
8
organic
5
biorefinery food
4
waste
4
food waste
4
waste biological
4

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!